| RG1-1789-220CN |
FUSER ASSY 220VAC |
| RG1-1791 |
Delivery roller assembly - Has four `Foam` rollers - For (Face down) top of printer paper output |
| RG1-1791-070 |
Delivery roller assembly - Has four `Foam` rollers - For (Face down) top of printer paper output |
| RG1-1791-070CN |
Delivery roller assembly - Has four `Foam` rollers - For (Face down) top of printer paper output |
| RG1-1792 |
Pickup roller assembly - For multipurpose input tray |
| RG1-1792-000 |
Pickup roller assembly - For multipurpose input tray |
| RG1-1792-000CN |
Pickup roller assembly - For multipurpose input tray |
| RG1-1793-000 |
Roller support - Supports left hand side of transfer roller |
| RG1-1794-000 |
Roller support - Supports right side of transfer roller |
| RG1-1806-070 |
Multipurpose Input Tray - Fold Down Front Cover |
| RG1-1809-000 |
Top cover assembly - Includes case pieces and control panel |
| RG1-1833-000 |
Drive Gear Asembly - Drives Face-up Delivery Roller in Front Door - Two Black 15 Tooth Gears on White Mounting Plate |
| RG1-1909-020 |
New part for 33471-69017 |
| RG1-1910-020 |
Power Supply Assembly (240V, 50Hz) - Main Power Supply |
| RG1-1910-020CN |
Power Supply Assembly (240V, 50Hz) - Main Power Supply |
| RG1-1912 |
Separation pad - Rectangular pad - Behind pickup roller |
| RG1-1912-000CN |
Separation pad - Rectangular pad - Behind pickup roller |
| RG1-1912-080 |
Separation pad - Rectangular pad - Behind pickup roller |
| RG1-1912-080CN |
Separation pad - Rectangular pad - Behind pickup roller |
| RG1-1933-000 |
New part for 33471-69002 |
| RG1-1946-000 |
Cable Assembly - to Automatic Envelope Feeder |
| RG1-1946-000CN |
Cable Assembly - to Automatic Envelope Feeder |
| RG1-1969-050 |
New part for 33449-69004 |
| RG1-1969-050CN |
New (Exchange part is 33449-69004) |
| RG1-1970-070 |
DC controller board |
| RG1-1974-000 |
Control panel assembly |
| RG1-1989-000 |
Control panel assembly |
| RG1-1992-000 |
Switchback assembly - Does NOT include exterior case pieces |
| RG1-1993-000 |
`Face-up` paper output tray - Mounts on switchback assembly |
| RG1-2007-000 |
DC Power Supply Assembly (120V, 60Hz) - Main Power Supply |
| RG1-2009-000 |
DC Power Supply Assembly (240V, 50Hz) - Main Power Supply |
| RG1-2067-000 |
Cable Assembly - from DC Controller to Laser/Scanner Assy |
| RG1-2307-000 |
Cable assembly - From formatter board to control panel |
| RG1-2498-000 |
Lower duplex guide assembly - Does NOT include the paper alignment roller |
| RG1-2499-000 |
Upper pickup (Feed) roller - Feeds paper from input tray |
| RG1-2500-000 |
Lower pickup (Feed) roller - Feeds paper from input tray |
| RG1-2549-000 |
Paper control board - Includes solenoids for the upper paper pickup roller and the registration assembly |
| RG1-2622-000 |
Paper Path Door Asy (120V, 60Hz) - Complete Front of Printer |
| RG1-2623-000 |
Paper Path Door Asy (240V, 50Hz) - Complete Front of Printer |
| RG1-2625-000 |
Top cover assembly - Includes case pieces and control panel |
| RG1-2662-000 |
Top cover assembly - Includes case pieces and control panel |
| RG1-2692-000 |
Paper Path Door Asy (120V, 60Hz) - Complete Front of Printer |
| RG1-2693-000 |
Paper Path Door Asy (240V, 50Hz) - Complete Front of Printer |
| RG1-2802-000 |
Tray Top Cover - for Upper Tray When Using Envelope Feeder - Includes Manual Feed Guide Arms |
| RG1-2802-000CN |
Tray Top Cover - for Upper Tray When Using Envelope Feeder - Includes Manual Feed Guide Arms |
| RG1-3501-000 |
Duplexer Controller Board - Large Board in the Bottom of the Duplexer |
| RG1-3503-000 |
Power Supply Assembly - Small Board in the Bottom Right of the Duplexer |
| RG1-3503-000CN |
Power Supply Assembly - Small Board in the Bottom Right of the Duplexer |
| RG1-3508-030 |
Upper Rear Cover Assembly - Large `Box` Structure on the Rear of the LaserJet (Covering the Switchback Area of the Duplexer) - Includes Paper Reversing Tray (on Top) and Latch |
| RG1-3529-000 |
Sensor cable - From controller PCA to photo sensor PS1 |
| RG1-3529-000CN |
Sensor cable - From controller PCA to photo sensor PS1 |
| RG1-3570-000 |
Upper Rear Cover Assembly - Large `Box` Structure on the Rear of the LaserJet (Covering the Switchback Area of the Duplexer) - Includes Paper Reversing Tray (on Top) and Latch |
| RG1-3570-000CN |
Upper Rear Cover Assembly - Large `Box` Structure on the Rear of the LaserJet (Covering the Switchback Area of the Duplexer) - Includes Paper Reversing Tray (on Top) and Latch |
| RG1-3582-000 |
Duplexer Controller Board - Large Board in the Bottom of the Duplexer |
| RG1-3582-000CN |
Duplexer Controller Board - Large Board in the Bottom of the Duplexer |
| RG1-3814-000 |
Bin full and interlock sensor board |
| RG1-3814-000CN |
Bin full and interlock sensor board |
| RG1-3815-000 |
Sensor PCA - Empty bin sensor board |
| RG1-3815-000CN |
Sensor PCA - Empty bin sensor board |
| RG1-3816-000 |
Face-up bin full and sensor PCA |
| RG1-3816-000CN |
Face-up bin full and sensor PCA |
| RG1-3817-000 |
LED PCA - Status panel LED display board |
| RG1-3817-000CN |
LED PCA - Status panel LED display board |
| RG1-3837-000 |
Face-down Bin - Even Face-down Bin Assembly - Two Rollers |
| RG1-3837-000CN |
New (Exchange part is C4783-69503) |
| RG1-3838-000 |
Top Cover - Top Cover Assembly - Upper Guide |
| RG1-3838-000CN |
New (Exchange part is C4783-69504) |
| RG1-3840-000 |
Right Cover - Right Side Cover Below Diverter Assembly |
| RG1-3840-000CN |
Right Cover - Right Side Cover Below Diverter Assembly |
| RG1-3844-000 |
Diverter assembly - Flipper |
| RG1-3844-000CN |
Diverter assembly - Flipper |
| RG1-3853-060 |
Controller board - 7-bin tabletop mailbox controller PCA |
| RG1-3853-060CN |
Controller board - 7-bin tabletop mailbox controller PCA |
| RG1-4138-000CN |
Paper feeder drive assembly for 500 sheet tray |
| RG1-4139-000CN |
Paper feeder controller PC Board for 500 sheet feeder |
|