| RB1-7883-000CN |
Door - on Top of Printer (Lift-Up Printer Access Cover) - This Part is No Longer Available - Order the Top Cover Assy |
| RB1-7885-000 |
MP Tray Extension - Flips Out from MP Door (Tray) |
| RB1-7885-000CN |
MP Tray Extension - Flips Out from MP Door (Tray) |
| RB1-7886-000 |
MP door - On front panel - Does NOT include tray extension |
| RB1-7886-000CN |
MP door - On front panel - Does NOT include tray extension |
| RB1-7887-000 |
Display Window - Attaches to the Control Panel Assembly |
| RB1-7887-000CN |
Display Window - Attaches to the Control Panel Assembly |
| RB1-7888-000 |
Inner Cover Plate - Removed When Installing Envelope Feeder |
| RB1-7888-000CN |
Inner Cover Plate - Removed When Installing Envelope Feeder |
| RB1-7889-000 |
Right Front Cover Assy - Includes Spring Loaded Font Door |
| RB1-7889-000CN |
Right Front Cover Assy - Includes Spring Loaded Font Door |
| RB1-7890-000 |
Latch - Top, Center of Rear Door Assembly |
| RB1-7890-000CN |
Latch - Top, Center of Rear Door Assembly |
| RB1-7895-000 |
Hook Tool - for Removing the Transfer Roller - Stored Under the Top Cover Door (Towards the Front) |
| RB1-7895-000CN |
Hook Tool - for Removing the Transfer Roller - Stored Under the Top Cover Door (Towards the Front) |
| RB1-7896-000 |
Power switch rod - From main switch assembly to power supply |
| RB1-7896-000CN |
Power switch rod - From main switch assembly to power supply |
| RB1-7902-000 |
MP Tray/Front Door Latch - Mounts in the Latch Holders in the Top of the Chassis (2 Used) |
| RB1-7902-000CN |
MP Tray/Front Door Latch - Mounts in the Latch Holders in the Top of the Chassis (2 Used) |
| RB1-7903-000 |
Left Latch Holder - for the MP Tray/Front Door - Mounts in the Top Left Corner of the Chassis |
| RB1-7903-000CN |
Left Latch Holder - for the MP Tray/Front Door - Mounts in the Top Left Corner of the Chassis |
| RB1-7906-000 |
Base structure - For the power switch actuator assembly - Does NOT include the power switch |
| RB1-7906-000CN |
Base structure - For the power switch actuator assembly - Does NOT include the power switch |
| RB1-7907-000 |
Power Switch Button (Rocker) - Mounts to Switch Actuator Base - Protrudes Through Right Front Bottom of Printer |
| RB1-7907-000CN |
Power Switch Button (Rocker) - Mounts to Switch Actuator Base - Protrudes Through Right Front Bottom of Printer |
| RB1-7911 |
Pickup roller (Quarter circle shaped) - For upper cassette |
| RB1-7911-000 |
Pickup roller (Quarter circle shaped) - For upper cassette |
| RB1-7911-000CN |
Pickup roller (Quarter circle shaped) - For upper cassette |
| RB1-7913-000 |
Cassette Guide - Paper Cassette Support Guide - Left Side |
| RB1-7913-000CN |
Cassette Guide - Paper Cassette Support Guide - Left Side |
| RB1-7923-000 |
Right Latch Holder - for the MP Tray/Front Door - Mounts in the Top Right Corner of the Chassis |
| RB1-7923-000CN |
Right Latch Holder - for the MP Tray/Front Door - Mounts in the Top Right Corner of the Chassis |
| RB1-7925-000 |
LaserJet 5 Nameplate - Mounts on Front of Top Cover |
| RB1-7925-000CN |
LaserJet 5 Nameplate - Mounts on Front of Top Cover |
| RB1-7983 |
|
| RB1-7983-000 |
Pickup Roller (Oval Shaped) - in the (C3921A) Lower Cassette Base Assembly |
| RB1-7983-000CN |
Pickup Roller (Oval Shaped) - in the (C3921A) Lower Cassette Base Assembly |
| RB1-8107-000 |
Printer Foot - Four Used |
| RB1-8107-000CN |
Printer Foot - Four Used |
| RB1-8668-030 |
Feed guide drive belt - Small belt approximately 5/16 inch wide with `A` shaped ribs on it |
| RB1-8668-030CN |
Feed guide drive belt - Small belt approximately 5/16 inch wide with `A` shaped ribs on it |
| RB1-8671-000 |
Left side top cover support |
| RB1-8671-000CN |
Left side top cover support |
| RB1-8674-000 |
Belt drive shaft |
| RB1-8674-000CN |
Belt drive shaft |
| RB1-8688-000 |
Engine test button - Manual test button |
| RB1-8688-000CN |
Engine test button - Manual test button |
| RB1-8689-000 |
Cable holder |
| RB1-8689-000CN |
Cable holder |
| RB1-8690-000 |
Toner cartridge sensing spring retainer |
| RB1-8690-000CN |
Toner cartridge sensing spring retainer |
| RB1-8693-000 |
Toner cartridge drum ground spring |
| RB1-8693-000CN |
Toner cartridge drum ground spring |
| RB1-8694-000 |
Interlock switch support ground strap |
| RB1-8694-000CN |
Interlock switch support ground strap |
| RB1-8695-000 |
Toner cartridge sensing spring |
| RB1-8695-000CN |
Toner cartridge sensing spring |
| RB1-8699-000 |
Laser/scanner shutter |
| RB1-8699-000CN |
Laser/scanner shutter |
| RB1-8700-000 |
Laser shutter arm |
| RB1-8700-000CN |
Laser shutter arm |
| RB1-8702-000 |
Laser shutter spring - Provides tension for laser shutter |
| RB1-8702-000CN |
Laser shutter spring - Provides tension for laser shutter |
| RB1-8703-000 |
Module attachment screw - Long screw with shoulder at bottom |
| RB1-8703-000CN |
Module attachment screw - Long screw with shoulder at bottom |
| RB1-8704-030 |
Bottom cable guide |
| RB1-8704-030CN |
Bottom cable guide |
| RB1-8706-000 |
Main cooling fan cover |
| RB1-8706-000CN |
Main cooling fan cover |
| RB1-8708-000 |
Gear plate ground strap |
| RB1-8708-000CN |
Gear plate ground strap |
| RB1-8710-000 |
Plate cover |
| RB1-8710-000CN |
Plate cover |
| RB1-8747-000 |
Registration assembly ground plate |
| RB1-8747-000CN |
Registration assembly ground plate |
|