| 07BA12582KC |
Flip-Up Paper Stop - on Top Cover - for Paper Output |
| 07BA-1340KC |
Fuser Cooling Fan (FM9) - Center of Printer, under Top Cover |
| 07BA-1370KC |
Left Side Cover - below Flip-up Developer Access Door |
| 07BA-1430KC |
Font cartridge access door - Right side of lower front cover |
| 07BA-1441KC |
Top Cover - Includes Paper Stop, Hinge Assembly and Cover Release Button with Spring - Order Nameplate Separately |
| 07BA-1450KC |
SIMM slot access door - Attaches to right side cover |
| 07BA-1610KC |
Developer Control Motor (M3) - on Upper Right Side of Chassis Located below Developer Drive Motor (M2) |
| 07BA-1640KC |
Cam Solenoid (SL4) - on Upper Right Side Chassis - Engages Clutch That Causes Developer Drive Motor to Rotate |
| 07BA-1660KC |
Cam/Gear Assembly - on Upper Right Side of Chassis |
| 07BA-1670KC |
Cam/Gear Assembly - on Upper Left Side of Chassis |
| 07BA-1701KC |
Exit Roller (6 Used) - White Rollers Visible on Top Cover |
| 07BA-3160KC |
Developer Access Door - Flip-up Cover on Left Side |
| 07BA-3520KC |
Toner Supply Solenoid Assembly (SL6) - Mounts on the Side of the Toner Hopper Assembly |
| 07BA-4062KC |
Pickup rollers - Shaft with six `D` shaped rollers - Feeds paper from paper input tray |
| 07BA-4072KC |
Paper Feed Gear (a Spring Attaches to the Middle of the Gear) - on Lower Right Side of Printer |
| 07BA-4121KC |
Lower rear cover (serial number of printer is on this cover) - Includes double roller assembly in center of cover |
| 07BA-4180KC |
Paper Feed Solenoid (SL1) - Lower Right Side of Printer Actuates Clutch to Allow Paper Pickup From Paper Tray |
| 07BA-4310KC |
Registration Solenoid (SL2) - Lower Left Side of Printer Activation Causes Registration Plate to Drop |
| 07BA-5005KC |
Complete paper exit assembly - Includes gears, belt, rollers, sensor etc. - ONLY part separately available is photosensor (PS1) |
| 07BA-6503KC |
Laser/Scanner Assembly - Located Under Top Cover of Printer |
| 07BA-70031KC |
Control panel cover - For display area |
| 07BA-7010KC |
Control panel cover (L-shaped) - Shows button functions (English) |
| 07BA-7323KC |
Developer High Voltage Supply - Located on Upper Right Side |
| 07BA77320KC |
74 Tooth Gear/Belt Pulley - on Lower Right Side of Printer |
| 07BA77850KC |
25 Tooth Gear - on Upper Right Side of Chassis |
| 07BA77860KC |
36 Tooth Gear - on Upper Right Side of Chassis |
| 07BA77990KC |
23 Teeth Gear - on Upper Right Side of Chassis |
| 07BA78010KC |
19 Tooth Gear - on Upper Right Side of Chassis |
| 07BA-7916KC |
Control Board - Mounts on the Right Side of the Printer (Behind the Formatter Board Case) |
| 07BA80522KC |
Tubeaxial Fan (FM8) - For the Power Supply Drawer Assembly (Mounts Behind the Lower Front Cover) |
| 07BA80534KC |
Formatter Board Cooling Fan (FM5) - Mounts on the Rear of Controller Board Case Assembly |
| 07BA84518KC |
DC Power Supply (for 110V to 127V, 60Hz Operation) - Mounts on Left Side of Power Supply Drawer |
| 07BA84525KC |
Noise Filter Board (for 110V to 127V, 60Hz Operation) - Mounts on Right Rear Corner of Power Supply Drawer |
| 07BA86010KC |
Interlock Switch - Mounts in Power Supply Drawer Assembly - Disables AC Power Supply When Top Cover is Opened |
| 07BA-9206KC |
AC Power Supply Board (for 110V to 127V, 60Hz Operation) - Mounts on Front Right Corner of Power Supply Drawer |
| 07BA-9330KC |
Non-Volatile Ram IC (NVRAM) -For NVRAM issues please contact Boise HP-TSSC Help Desk via Email at LJ_ONLINE@hp.com or call Telnet (208) 396-2537 |
| 07BA-9525KC |
Rear Feed Unit Connector Board - Housed in the Large Rear Feed Unit Support Bracket (on Rear Lower Cover of Printer) |
| 07BA-9601KC |
Paper size sensor - Detects size of paper tray being used |
| 07BA-9696KC |
Toner Detect Board - Mounts in Lower Left Side of Printer |
| 07BB84518KC |
DC Power Supply (for 220V to 240V, 50Hz Operation) - Mounts on Left Side of Power Supply Drawer |
| 07BB84525KC |
Noise Filter Board (for 220V to 240V, 50Hz Operation) - Mounts on Right Rear Corner of Power Supply Drawer |
| 07BB-9205KC |
AC Power Supply Board (for 220V to 240V, 50Hz Operation) - Mounts on Front Right Corner of Power Supply Drawer |
| 07BM-1012KC |
Power Supply Drawer Assy - for 110V to 127V, 60Hz Operation |
| 07BM-1081KC |
Main Body Fan (FM4) - Front Right Corner of Lower Chassis |
| 07BM10971KC |
Ozone Filter - Slides in Filter Holder in Front of the Main Body Fan (Behind the Control Panel Assembly) |
| 07BM-1380KC |
Cleaning Tool - for Laser Optics Glass - When NOT in use is Stored in Left Front Corner Area of Lower Half of Printer |
| 07BM-1504KC |
Main Motor (M1) Assembly - on Lower Right Side Chassis - Includes Gear Cluster on Attached Bracket |
| 07BM-1552KC |
Developer Drive Assy (for 110V to 127V, 60Hz) - on Upper Right Side Chassis Includes Developer Drive Motor (M2), Developer Control Motor (M3), and Toner Supply Solenoid (SL3) |
| 07BM-3911KC |
Complete toner hopper assembly - Includes hoppers, augers, toner supply solenoid (SL6), and the 4 `Toner Out` sensors |
| 07BM-7310KC |
High Voltage Power Supply - Supplies the Corona Voltages - Mounts in Lower Right Side of Printer |
| 07BM-7320KC |
Developer High Voltage Supply - Located on Upper Right Side |
| 07BM-7917KC |
Control Board - Mounts on the Right Side of the Printer (Behind the Formatter Board Case) |
| 07BP-1012KC |
Power Supply Drawer Assy - for 220V to 240V, 50Hz Operation |
| 07BP-1552KC |
See Description Developer Drive Motor (M2) - in Upper Right Side of Chassis Above the Developer Control Motor (M3) - Motor NOT Sold Separately: Order the Developer Drive Assembly |
| 07BP-7000KC |
Control panel/display assembly - Complete |
| 0950-2372 |
Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts - For J2382/83A/B |
| 0950-3169 |
Wall mount power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA, Canada) - For use with the J2592A external JetDirect LAN interface module |
| 0950-3170 |
Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 300mA (Europe, Israel) - For use with the J2592A external JetDirect LAN interface module |
| 0950-3171 |
Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U.K., Hong Kong) - For use with the J2592A external JetDirect LAN interface module |
| 0950-3172 |
Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia) - For use with the J2592A external JetDirect LAN interface module |
| 0950-3348 |
Wall mount power supply module (MEI-AH ED12006) - 110-127VAC input, 57-63Hz - 13VDC output, 800mA, 10.4 watts - Flat blade, non-polarized, ungrounded (USA, Canada) - For Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B |
| 0950-3349 |
Wall mount power supply module (MEI-AH ED12007) - 230VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (Europe, Israel) - For JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B |
| 0950-3350 |
Wall mount power supply module (MEI-AH ED12008) - 220-240VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (U.K.) - For JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B |
| 0950-3351 |
Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea) - For JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B |
| 0950-3352 |
Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (Japan) - For JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B |
| 0950-3354 |
Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa) - For JetDirect Modules and Infrared Interface Models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B, J4101A/B, J4102A/B |
| 097K34330 |
Xerox N24/32/40 Fusing assembly (for 110V to 127V, 60Hz operation) - Bonds toner to paper by heat |
| 108R0092 |
IBM-Network Fusing assembly (for 110V to 127V, 60Hz operation) - Bonds toner to paper by heat |
| 1252-5278 |
Formatter board to DC controller connector (Snap fit) |
| 1252-5460 |
DC controller connector - Interconnect between formatter PCA and DC controller PCA - NOT included on controller PCA |
| 126K10012 |
Xerox N24/32/40 Maintenance Kit |
| 1492-0167 |
Caster (Without Brake) - for Optional Output Stacker(C2801A) - (4 Used) |
| 1492-0168 |
Caster (With Brake) - for Optional Output Stacker(C2801A) - (2 Used) |
| 17255D |
RS-232C (Serial) Cable - 25 Pin (M) to 25 Pin (F) - to Connect to HP Vectra and IBM PC/AT/XT Compatibles - 1.2m |
| 17302A |
RS-232C (Serial) Cable - 25 Pin (M) to 8 Pin (M) - to Connect to Apple Macintosh - 1.5m |
|