|
|
| PRICING CATEGORY ENGINES ERROR CODES INSTRUCTIONS KEYWORDS PARTS DETAILS HOME |
Part Number |
Replacement |
Description |
|||
| 02684-60102 | Cable - from Formatter Power Supply Board to Formatter Board | ||||
| 02684-60104 | Cable - Serial Interface Board to Rear Panel I/O Connector | ||||
| 02684-60105 | Cable - Centronic Interface Bd to Rear Panel I/O Connector | ||||
| 02684-60106 | Cable - DataProduct Interface Bd to Rear Panel I/O Connector | ||||
| 02684-60107 | Cable - from Engine Interface Board to Control Panel | ||||
| C2801-60003 | Interface Cable - from Optional Output Stacker (C2801A) to Printer Sensor Board | ||||
| C2801-80014 | Elevator Module Ribbon Cable - for Output Stacker (C2801A) | ||||
| C2801-80026 | E Box Interface Cable - Short Cable Mounted on Cover of E Box - From Phone Jack Connection on Printer Interface Cable to 2 Pin connector on E Box | ||||
| C2965-60004 | Disk Drive Ribbon Cable - from Disk Drive to Formatter Board | ||||
| C3125-00001 | DCC Cable - Connects Thermal PCA to DC Controller Board | ||||
| C3764-60546 | Flipper Cable - from Flipper Assembly to Controller Board - for C3764A Multi-Bin Mailbox | ||||
| C3764-60547 | Elevator Stepper Motor Cable - from Elevator Motor to Controller Board - for C3764A Multi-Bin Mailbox | ||||
| C3764-67903 | Flat Ribbon Cable Kit - Includes Cable and 2 Cable Holders - from Delivery Head to Controller Board - for C3764A Multi-Bin Mailbox | ||||
| C4787-60507 | Stapler Unit C-link Cable - 97cm Long - Connects Between the Multibin Mailbox and the Stapler Unit | ||||
| C8085-60515 | Flipper and paper path ribbon cable | ||||
| C8085-60517 | Jet-link cable and power cord assembly - | ||||
| C9148-60102 | Scanner power cable - Power cable between scanner unit and printer | ||||
| C9706-60104 | Flat flexible cable - Connects between the DC controller board and the formatter board | ||||
| PA03002-C125FJ | Front panel cable - Between front panel and junction PCA | ||||
| PA03002-C203FJ | DC cable - From power supply to copier logic board | ||||
| PA03002-C204FJ | Carrier flex cable - From carrier unit to junction PCA | ||||
| PA03002-C228FJ | Sensor cable - Connects ADF sensors to copier control board | ||||
| PA03002-C229FJ | CCD cable - From control PCA to CCD PCA on optical unit | ||||
| RF1-0449-000 | Potential Sensor Cable - in Main Print Engine - 4 Connectors | ||||
| RF1-0604-020 | Fiber Optic Cable - in Main Print Engine Unit | ||||
| RF1-2427-000 | AC connector cable assembly - For fusing assembly | ||||
| RG0-1097-000 | 4-wire cable assembly - Connects between the laser/scanner assembly and the formatter PC board | ||||
| RG0-1097-000CN | 4-wire cable assembly - Connects between the laser/scanner assembly and the connector PC board | ||||
| RG1-0905-000 | Cable assembly - From AC power module to DC power supply | ||||
| RG1-0906-000 | Cable assy - From DC controller to high voltage power supply | ||||
| RG1-0907-000 | Cable Assy - from DC Controller to Fusing Assy(Exit Snsr Bd) | ||||
| RG1-0908-000 | Dual Cable - from DC Controller to Laser Drive/Scanner Motor | ||||
| RG1-0912-000 | Cable Assembly - from DC Controller to AC Power Module | ||||
| RG1-1318-000 | Upper Main Cable Harness (120V, 60Hz) - to Most Major Assy`s | ||||
| RG1-1319-000 | Lower main cable harness | ||||
| RG1-1370-000 | Cable Assembly - from DC Controller to Laser/Scanner Assy | ||||
| RG1-1602-000 | Cable assembly - From AC power supply to fusing assembly | ||||
| RG1-1608-000 | Cable Assy - to Paper Path Door - Includes Pickup Solenoid | ||||
| RG1-1609-000 | Cable Assembly (has 8 Connectors) - to Most Major Assemblies | ||||
| RG1-1612-000 | Cable Assy - from DC Controller to Paper Input Pickup Sensor | ||||
| RG1-1632-000 | Upper Main Cable Harness (240V, 50Hz) - to Most Major Assy`s | ||||
| RG1-1946-000 | Cable Assembly - to Automatic Envelope Feeder | ||||
| RG1-2067-000 | Cable Assembly - from DC Controller to Laser/Scanner Assy | ||||
| RG1-2307-000 | Cable assembly - From formatter board to control panel | ||||
| RG1-3529-000 | Sensor cable - From controller PCA to photo sensor PS1 | ||||
| RG1-4213-000 | Top Cover cable - From top cover microswitch to | ||||
| RG1-4214-000 | Top bin full sensor cable | ||||
| RG1-4215-000 | Control panel cable | ||||
| RG1-4215-000CN | Control panel cable | ||||
| RG1-4219-000 | Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag | ||||
| RG1-4221-000 | Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107 | ||||
| RG1-4223-000 | Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector | ||||
| RG1-4224-000 | Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector | ||||
| RG1-4231-000 | Fuser cable - Main fuser cable for LaserJet 4300 series | ||||
| RG1-4240-000 | Media size sensor cable | ||||
| RG1-4241-000 | Front door sensor cable | ||||
| RG1-4250-000 | Sensor cable assembly - For 500 sheet feeder assembly | ||||
| RG1-4309-000 | Delivery sensor cable assembly | ||||
| RG1-4309-000CN | Delivery sensor cable assembly | ||||
| RG1-4310-000 | F/G cable - Chassis to scanner mounting plate ground cable | ||||
| RG1-4310-000CN | F/G cable - Chassis to scanner mounting plate ground cable | ||||
| RG1-4314-000 | Control panel cable assembly | ||||
| RG1-4314-000CN | Control panel cable assembly | ||||
| RG5-0103-000 | Cable Assy - from DC Controller to Laser/Scanner Assembly | ||||
| RG5-0104-000 | Cable Assy - from DC Controller to High Voltage Power Supply | ||||
| RG5-0107-000 | Cable Assembly - from Formatter Board to Control Panel Assy | ||||
| RG5-0108-000 | Cable assembly - From DC controller to paper input board | ||||
| RG5-0109-000 | Cable assembly - From DC controller to duplex board | ||||
| RG5-0130-000 | Cable assembly - From DC controller to formatter board | ||||
| RG5-0156-030 | Cable Assembly - from Formatter Board to Control Panel Assy | ||||
| RG5-0239-000 | Cable - From DC controller board to cassette size sensor board and front cover connect board | ||||
| RG5-0239-000CN | Cable - From DC controller board to cassette size sensor board and front cover connect board | ||||
| RG5-0519-000 | Cable Assembly - from DC Controller Bd to the Control Panel | ||||
| RG5-0520-000 | Cable assembly - From DC controller to scanner assembly | ||||
| RG5-0521-000 | Cable Assembly - from DC Controller to Connector Board Assembly (for High Voltage Connector Block) | ||||
| RG5-0522-000 | Cable assembly - From DC controller to delivery sensor (PS3) | ||||
| RG5-0524-000 | Cable assembly - From DC controller to paper control board | ||||
| RG5-0526-000 | Cable assembly - From DC controller to AC power supply | ||||
| RG5-0529-000 | Cable Assy - from Paper Control Board to Envelope Feeder | ||||
| RG5-0530-000 | Cable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly | ||||
| RG5-0530-000CN | Cable assembly - From paper control board to connector for the optional lower cassette sheet feeder assembly | ||||
| RG5-0538-000 | Cable assembly - From DC controller to main motor | ||||
| RG5-0556-000 | Cable assembly - From DC controller to laser assembly | ||||
| RG5-0766-030 | Scanner connector assembly - Scanner to DC controller board | ||||
| RG5-0815-000 | Control Panel Cable - from Control Panel to Formatter Board | ||||
| RG5-0975-000 | Cable Assembly - from DC Controller to Scanner Assembly | ||||
| RG5-0975-000CN | Cable Assembly - from DC Controller to Scanner Assembly | ||||
| RG5-0976-000 | Cable Assembly - from DC Controller to Laser Assembly | ||||
| RG5-0976-000CN | Cable Assembly - from DC Controller to Laser Assembly | ||||
| RG5-0978-000 | Cable assembly - From DC controller to main motor | ||||
| RG5-0978-000CN | Cable assembly - From DC controller to main motor | ||||
| RG5-0979-000 | Cable Assembly - from DC Controller to Connector Board Assembly (for High Voltage Connector Block) | ||||
| RG5-0979-000CN | Cable Assembly - from DC Controller to Connector Board Assembly (for High Voltage Connector Block) | ||||
| RG5-0980-000 | Cable assembly - From DC controller to delivery sensor (PS3) | ||||
| RG5-0982-000 | Cable Assembly - from DC Controller Bd to the Control Panel | ||||
| RG5-1442-000 | Beam Detect Cable - from DC Controller Board to BDIC Board of the Laser/Scanner Assembly | ||||
| RG5-1446-000 | Cable - from DC Controller Board to Optional Lower Cassette | ||||
| RG5-1446-000CN | Cable - from DC Controller Board to Optional Lower Cassette | ||||
| RG5-1447-000 | Cable - From DC controller board to registration and cassette paper pick-up clutches | ||||
| RG5-1447-000CN | Cable - From DC controller board to registration and cassette paper pick-up clutches | ||||
| RG5-1485-000 | Cable - From control panel to interface board | ||||
| RG5-1485-000CN | Cable - From control panel to interface board | ||||
| RG5-1804-000 | Cable - from Sensor Located in Multipurpose Pickup Assy Area to Small Connector Bd Attached to DC Controller/PS Board | ||||
| RG5-1804-000CN | Cable - from Sensor Located in Multipurpose Pickup Assy Area to Small Connector Bd Attached to DC Controller/PS Board | ||||
| RG5-1843-000 | Paper sensor cable - J11 to J15 | ||||
| RG5-1849-000 | Cable assembly - Fuser cable 1 - J50/51 to J10/56/222 | ||||
| RG5-1850-000 | Duplexer cable assembly - From duplexer to DC controller | ||||
| RG5-1859-000 | Sensor cable - PIU PS2 sensor cable - J13 to J1205 | ||||
| RG5-1859-000CN | Sensor cable - PIU PS2 sensor cable - J13 to J1205 | ||||
| RG5-1861-000 | Sensor Cable - PIU Paper Sensor Cable - J1201 to J219 | ||||
| RG5-1919-000 | Cable assembly - From DC controller board to main motor | ||||
| RG5-1920-000 | Cassette size sensor cable - Between cassette size sensor PCA`s and formatter board | ||||
| RG5-1921-000 | Fan cable - Fan 3 power cable | ||||
| RG5-1923-000 | Front Panel Cable - Control Panel Display Cable - No Longer Available - Order the Two Cable Bundle | ||||
| RG5-1924-000 | Cable Assembly - Two Cable Bundle - From DC Controller Board to Laser Scanner and to Control Panel | ||||
| RG5-1925-000 | Cable Assembly - Scanner Motor Cable | ||||
| RG5-1926-000 | BD cable - J18 to J2007 | ||||
| RG5-1927-000 | ILS cable - From J1401 to J221/J205 | ||||
| RG5-1928-000 | Registration cable assembly - Includes 7P and 3P connectors | ||||
| RG5-2029-000 | Cable - from Connector J202 on DC Controller Bd to Paper Registration and Paper-out Photosensors (PS203 and PS202) | ||||
| RG5-2029-000CN | Cable - from Connector J202 on DC Controller Bd to Paper Registration and Paper-out Photosensors (PS203 and PS202) | ||||
| RG5-2031-000 | Cable - from Connector J209 on DC Controller Bd to Door Closed/Toner Cartridge Installed Sensor (PS204) | ||||
| RG5-2032-000 | Cable - from Connector J206 on DC Controller Bd to Fusing Assembly | ||||
| RG5-2032-000CN | Cable - from Connector J206 on DC Controller Bd to Fusing Assembly | ||||
| RG5-2033-000 | Cable - from Connector J401 on DC Controller Bd to Main Motor | ||||
| RG5-2033-000CN | Cable - from Connector J401 on DC Controller Bd to Main Motor | ||||
| RG5-2034-000 | Cable - from Connector J207 on DC Controller Bd to Scanner Motor | ||||
| RG5-2034-000CN | Cable - from Connector J207 on DC Controller Bd to Scanner Motor | ||||
| RG5-2035-000 | Cable - from Connector J208 on DC Controller Board to Laser Unit (Laser Driver/Beam Detect Circuitry) | ||||
| RG5-2035-000CN | Cable - from Connector J208 on DC Controller Board to Laser Unit (Laser Driver/Beam Detect Circuitry) | ||||
| RG5-2036-000 | Cable - From control panel to formatter board | ||||
| RG5-2036-000CN | Cable - From control panel to formatter board | ||||
| RG5-2037-000 | Cable - from Connector J305 on DC Controller Bd to Switch 101 - Switch is Actuated by Opening/Closing EP (Toner) Door | ||||
| RG5-2037-000CN | Cable - from Connector J305 on DC Controller Bd to Switch 101 - Switch is Actuated by Opening/Closing EP (Toner) Door | ||||
| RG5-3499-000 | Cable - From control panel to formatter board | ||||
| RG5-3499-000CN | Cable - From control panel to formatter board | ||||
| RG5-3523-000 | Paper feed photo sensor cable | ||||
| RG5-3554-000 | Face down bin full cable | ||||
| RG5-3557-000 | Display/Accessory Power/Photo Sensor Cable | ||||
| RG5-3558-000 | Top of page sensor cable | ||||
| RG5-3561-000 | Fuser cable | ||||
| RG5-3562-000 | Scanner Cable | ||||
| RG5-3575-000 | Control panel cable | ||||
| RG5-3575-000CN | Control panel cable | ||||
| RG5-3661-000 | Cable - from Connector J207 on DC Controller Bd to Scanner Motor | ||||
| RG5-3661-000CN | Cable - from Connector J207 on DC Controller Bd to Scanner Motor | ||||
| RG5-3662-000 | Cable - from Connector J209 on DC Controller Bd to Door Closed/Toner Cartridge Installed Sensor (PS204) | ||||
| RG5-3662-000CN | Cable - from Connector J209 on DC Controller Bd to Door Closed/Toner Cartridge Installed Sensor (PS204) | ||||
| RG5-3700-000 | Tray 1 Sensor Cable | ||||
| RG5-3700-000CN | Tray 1 Sensor Cable | ||||
| RG5-3703-000 | Paper Feed/Tray 1 Pickup Solenoid Cable | ||||
| RG5-3703-000CN | Paper Feed/Tray 1 Pickup Solenoid Cable | ||||
| RG5-3704-000 | Envelope feeder connector and cable | ||||
| RG5-3704-000CN | Envelope feeder connector and cable | ||||
| RG5-3705-000 | Top Cover Interlock Access Switch Cable | ||||
| RG5-3705-000CN | Top Cover Interlock Access Switch Cable | ||||
| RG5-3706-000 | Feed/registration sensor assembly cable | ||||
| RG5-3706-000CN | Feed/registration sensor assembly cable | ||||
| RG5-3708-000 | Formatter/Control Panel Cable | ||||
| RG5-3708-000CN | Formatter/Control Panel Cable | ||||
| RG5-3709-000 | Main motor cable | ||||
| RG5-3709-000CN | Main motor cable | ||||
| RG5-3710-000 | Paper feeder module cable | ||||
| RG5-3710-000CN | Paper feeder module cable | ||||
| RG5-3711-000 | Optical sensor cable | ||||
| RG5-3711-000CN | Optical sensor cable | ||||
| RG5-3781-000CN | Main Cable Assembly - Where Serial Number Prefix = JPGxxx and below | ||||
| RG5-3782-000CN | Laser Cable - Between Laser and DC Controller | ||||
| RG5-3783-000CN | Developer Cable - From DC Contoller PCB to Developing PCB PC Board - Where Serial Number Prefix = JPGxxx and below | ||||
| RG5-3785-000CN | Paper feed cable | ||||
| RG5-3786-000CN | ITB Cable - Connects to ITB Drawer Connector | ||||
| RG5-3787-000CN | Fusing/Option Cable - Near Lower Right Corner | ||||
| RG5-3795-000CN | Rotary cable - From DC controller to carousel sensors | ||||
| RG5-3802-000CN | Control Panel Cable - Between Control Panel and Interconnect PC Board - Where Serial Number Prefix = JPGxxx and below | ||||
| RG5-3822-000 | Paper feeder cable | ||||
| RG5-3822-000CN | Paper feeder cable | ||||
| RG5-3876-000 | Laser Scanner and Output Bin Paper Sensor Cable | ||||
| RG5-3876-000CN | Laser Scanner and Output Bin Paper Sensor Cable | ||||
| RG5-3886-000CN | Fuser sensor cable - From fuser sensors to DC controller | ||||
| RG5-3887-000CN | Fan Cable - Right Rear Fan Power Cable - Where Serial Number Prefix = JPGxxx and below | ||||
| RG5-3909-000 | Power supply cable - Between power supply and controller PCA | ||||
| RG5-3919-000 | Main cable - Largest cable in C4781A | ||||
| RG5-4213-000 | Upper Contact Cable - | ||||
| RG5-4254-000 | Multi-purpose input tray sensor cable - Right side | ||||
| RG5-4255-000 | DC Power Cable - | ||||
| RG5-4262-000 | Paper Feeder Cable - | ||||
| RG5-4263-000 | Frame Ground Cable - | ||||
| RG5-4278-000 | Sensor Cable - Between Photo Sensor PS2001 and 250 Sheet Feeder Drive PC Board - J2110 to J2003 | ||||
| RG5-4280-000 | Relay Cable - From Feed Drive Controller Board to Feed Drive Relay - One Connector to Two Connectors - Six Wires | ||||
| RG5-4281-000 | Frame ground cable - Ground connection to feed drive housing - Round crimp lug to push-on connector with green wire | ||||
| RG5-4377-000 | Laser and Control Panel Cable | ||||
| RG5-4378-000 | Scanner Motor Cable | ||||
| RG5-4381-000 | Cable Assembly - Fuser Cable 1 | ||||
| RG5-4386-000 | Cable assembly - From DC controller board to main motor | ||||
| RG5-4440-000 | Main cable on input assembly | ||||
| RG5-4616-000 | Scanner Cable - Connects J208, J801 and J802 | ||||
| RG5-4617-000 | Sensor cable - Connects J211, J003 and J004 | ||||
| RG5-4618-000 | Motor cable - J007 to J401 | ||||
| RG5-4619-000 | Thermistor cable - J008 to J206 | ||||
| RG5-4620-000 | Display cable - Connects J1 to J901 on status display | ||||
| RG5-4650-000CN | Fan Cable - For Small Fan in Drum Drawer | ||||
| RG5-4651-000CN | ITB Switch Cable - From ITB Switch | ||||
| RG5-4726-000 | Front Panel Cable - Control Panel Display Cable | ||||
| RG5-5186-000CN | Main Cable Assembly - Where Serial Number Prefix = JPHx through JPZx | ||||
| RG5-5187-000CN | Developer Cable - From DC Contoller PC Board to Developing PC Board - Where Serial Number Prefix = JPHx through JPZx | ||||
| RG5-5195-000CN | Control Panel Cable - Between Control Panel and Interconnect PC Board - Where Serial Number Prefix = JPHx through JPZx | ||||
| RG5-5341-000 | Sensor Cable - Tray 1 sensor cable | ||||
| RG5-5343-000 | Paper feed and tray 1 pickup solenoid cable | ||||
| RG5-5344-000 | Envelope feeder cable with connector | ||||
| RG5-5345-000 | Top cover switch cable | ||||
| RG5-5346-000 | Main motor cable | ||||
| RG5-5348-000 | Laser/Scanner assembly scanner cable | ||||
| RG5-5349-000 | Output bin tray full sensor cable | ||||
| RG5-5350-000 | Laser/scanner assembly laser cable | ||||
| RG5-5351-000 | Formatter assembly cable | ||||
| RG5-5357-000 | Feed/registration sensor assembly cable | ||||
| RG5-5358-000 | Duplexer cable | ||||
| RG5-5470-000 | Memory cable - | ||||
| RG5-5471-000 | Antenna cable - | ||||
| RG5-5568-000 | Cable and Guide Assembly - Cables run between Solenoids and\n Engine Controller Board | ||||
| RG5-5583-000 | Sensor cable - Cable for PS1305 - Paper detection | ||||
| RG5-5598-000 | Paper-feed Cable - | ||||
| RG5-5598-000CN | Paper-feed cable - Includes the I/F cable from the Engine Controller PCA to the accessory paper tray connector and the Engine Controller PCA ground cable. | ||||
| RG5-5599-000 | Interface cable - The I/F cable from the Engine Controller PCA to the accessory paper tray connector - Six conductor/three connector cable | ||||
| RG5-5599-000CN | Interface cable - The I/F cable from the Engine Controller PCA to the accessory paper tray connector - Six conductor/three connector cable | ||||
| RG5-5600-000 | Grounding cable - Engine Controller PCA ground cable | ||||
| RG5-5600-000CN | Grounding cable - Engine Controller PCA ground cable | ||||
| RG5-5679-000 | Paper pickup cable - | ||||
| RG5-5722-000 | Main cable harness and holder assembly | ||||
| RG5-5723-000 | Upper cable guide assembly | ||||
| RG5-5759-000 | Fan control cable | ||||
| RG5-5763-000 | Tray 1/MP tray cable - Electrical connection between Tray1 and printer | ||||
| RG5-5764-000 | Tray 1/MP tray grounding cable - connects between printer chassis and Tray 1/MP tray | ||||
| RG5-5770-000 | Microswitch cable - Door interlock microswitch cable | ||||
| RG5-5771-000 | Fuser power cable - | ||||
| RG5-5772-000 | Fusing assembly high voltage cable and connectors | ||||
| RG5-6240-000 | Jetlink connector socket and cable | ||||
| RG5-6249-000 | Jetlink connector grounding cable | ||||
| RG5-6413-000CN | Left plate cable | ||||
| RG5-6414-000CN | Relay cable - Connects DC controller to HVPS, interlock switch to DC controller, and Fuser circuit to DC controller | ||||
| RG5-6415-000CN | DC Cable - DC power supply cable | ||||
| RG5-6418-000CN | Antenna cable - Between toner cartridge memory tag and antenna memory PC board - Four used | ||||
| RG5-6419-000CN | Paper feeder main cable | ||||
| RG5-6422-000CN | Intraface cable - Connects Formatter board to DC controller board and LVPS to Formatter board | ||||
| RG5-6423-000CN | Sensor cable - Cable for PS12 fuser delivery and PS13 output bin full | ||||
| RG5-6427-000CN | AC Cable - Connects AC power supply to fuser power supply - 110 volt AC | ||||
| RG5-6434-000CN | AC Cable - Connects AC power supply to fuser power supply - 220 volt AC | ||||
| RG5-6815-000 | AC cable - Low voltage power supply (LVPS) to fuser power supply cable | ||||
| RG5-6826-000 | DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) | ||||
| RG5-6971-000CN | Cable assembly (3 pin) - Power cable for the fusing assembly - Connects from the fusing assembly connector to the chassis ground and the low voltage power supply board | ||||
| RG5-6974-000CN | Cable assembly - Connects the toner cartridge E-label reader assembly on the carousel to the DC controller board | ||||
| RG5-7072-000 | Scanner cable | ||||
| RG5-7073-000 | Display/Accessory Power/Photo sensor cable | ||||
| RG5-7086-000 | Ribbon cable - From paper handling PC Board to controller PC Board | ||||
| RG5-7106-000CN | Cable assembly (2 pin) - Connects from the low voltage power supply board to the formatter board | ||||
| RG5-7107-000CN | Cable assembly (8 pin, red wire) - (J402 to J134) Connects the low voltage power supply board to the DC controller board | ||||
| RG5-7108-000CN | Cable assembly (8 pin, purple wire) - (J403 to J133) Connects the low voltage power supply board to the DC controller board | ||||
| RG5-7109-000CN | Cable assembly (7 pin) - Connects the DC controller board to the fusing assembly connector | ||||
| RG5-7114-000CN | Cable assembly - Short cable with two connectors and shield - Connects between the toner cartridge drive motor and the DC controller board | ||||
| RG5-7115-000CN | Cable assembly - Connects between the roller engaging sensor (PS714) and the DC controller board | ||||
| RG5-7117-000CN | Cable assembly - Connects the engaging sensor (PS 712) on the toner cartridge carousel to the DC controller board | ||||
| RG5-7122-000CN | Cable assembly - `Y` type cable 14 pin connector goes to 8 pin and 6 pin connectors - Connects between the DC controller board and the optional paper tray connector | ||||
| RG5-7123-000CN | Grounding cable assembly - Connects between the optional tray connector housing and the metal right side frame assembly | ||||
| RG5-7126-000CN | Cable assembly - Connects the Sub-high voltage board to the high voltage board | ||||
| RG5-7128-000CN | Cable assembly - Connects between the DC controller board and the leading edge paper sensor for the fusing assembly (PS720) and the waste toner sensor board | ||||
| RG5-7129-000CN | Cable assembly - Connects the toner cartridge contacts on the left carousel side plate to the high voltage power supply | ||||
| RG5-7130-000CN | High voltage cable assembly - Connects between the high voltage board spring contacts and the cables to the toner cartridge carousel left plate assembly | ||||
| RG5-7138-000CN | Cable assembly - From the sensor (PS717) (which senses paper feeding from optional tray 3) to the small interconnecting PC board on the | ||||
| right side frame/cover assembly - For the base on the 250 sheet input tray assembly | |||||
| RG5-7139-000CN | Cable assembly - From the paper out sensor (PS716) to the small interconnecting PC board on the right side frame/cover assembly - | ||||
| For the base on the 250 sheet input tray assembly | |||||
| RG5-7142-000CN | Cable assembly - Small cable between the paper out sensor (PS719) and the feed drive board - For the base on the 500 sheet input tray assembly | ||||
| RG5-7143-000CN | Cable assembly - Connects the feed drive motor to the feed drive board - For the base on the 500 sheet input tray assembly | ||||
| RG5-7144-000CN | Upper cable assembly (with seven connectors) - Interconnects various upper level components to the DC controller board | ||||
| RG5-7145-000CN | Front cable assembly (with six connectors) - Interconnects various components on the front frame assembly and right side to the DC controller board | ||||
| RG5-7146-000CN | High voltage cable assembly (Four connector) - Connects between the high voltage power supply board and the DC controller board | ||||
| RG5-7149-000CN | Connector assembly - Includes the 14 pin (F) interface connector and cable assembly - (Tray 2 to printer connector) Connects to the feed drive | ||||
| PC board in the cassette base assembly | |||||
| RG5-7198-000 | Upper contact cable | ||||
| RG9-1460-000 | Control panel cable | ||||
| RG9-1460-000CN | Control panel cable | ||||
| RH2-5104-000 | Fiber optic cable - From DC controller to fiber optic lens | ||||
| RH2-5108-000 | Fiber Optic Cable - from DC Controller to Laser/Scanner Assy | ||||
| RH2-5108-000CN | Fiber Optic Cable - from DC Controller to Laser/Scanner Assy | ||||
| RH2-5109-000 | Fiber Optic Cable - from DC Controller to Laser/Scanner Assy | ||||
| RH2-5259-000 | Cable - From DC controller/power supply board to small connector board | ||||
| RH2-5335-000CN | Video Interface Cable - From Interconnect PCA to DC Controller PCA | ||||
| RH2-5337-000 | Ribbon cable - Has two 40 pin (M) edge connectors - 1.4cm (0.6 inches) long | ||||
| RH2-5338-000 | Ribbon cable - From paper PCA to controller PCA | ||||
| RH2-5348-000 | Flat Cable - Large Flat Cable on Engine Controller Board | ||||
| RH2-5350-000 | Flat Cable - Top Right Side of Printer - White Cable - From Interconnect Board to Formatter Board | ||||
| RH2-5379-000 | Scanner Cable - Between Document Scanner and Formatter Board | ||||
| RH2-5381-000 | Flat Cable - From ECU Board to Formatter Board | ||||
| RH2-5400-000CN | Laser cable - Flat ribbon cable | ||||
| RH2-5427-000 | Flat cable - Connects to laser/scanner assembly | ||||
| RH2-5445-000 | High voltage power supply ribbon cable | ||||
| RH2-5471-000CN | Flat cable - Connects formatter board to DC controller board | ||||
| RH2-5524-000CN | Flat flexible cable - Connects between the laser/scanner assembly and the DC controller board | ||||
| RH2-5580-000 | Flat interface cable - Flat cable that connects between the Formatter and ECU board | ||||
| RH2-5580-000CN | Flat interface cable - Flat cable that connects between the Formatter and ECU board | ||||
| RH2-5594-000 | Flex ribbon cable assembly - Has two 10 pin (M) edge connectors - Connects between the laser/scanner assembly and the formatter PC board | ||||
| RK2-0029-000 | Flex cable - Has two 14 pin (M) edge connectors - Connects between the laser/scanner assembly and the formatter PC board | ||||
| RM1-0563-000 | Scanner motor cable assembly - 4 pin (F) connector to 4-pin (F) connector - Connects between the laser/scanner assembly and the formatter board |
© 1997 - 2008 Jim Catanich - Dallas Internet Marketing Catanich Terms of Use Terms of Sale Privacy Statement Cookies About Contact Press Site Map Website XHTML & CSS Valid |