Internet Marketing Dallas
Printer Parts » Printer Category » Paper Path Parts
Part Number |
Replacement |
Description |
|||
| 07AA15083KC | Upper paper exit rollers - Shaft with six rollers on it | ||||
| 07AA40114KC | Registration plate - Stops the paper until image on the print drum is aligned with the top of page | ||||
| 07AA40136KC | Lower feed roller - Shaft with two rollers - Next rollers (in paper path) after paper is pulled from the paper tray | ||||
| 07AA40142KC | Registration feed roller - Shaft with two rollers - Rollers located (in paper path) just before registration plate | ||||
| 07AA40153KC | Paper detect flag (L-SHAPED) - Mounts on right end of paper detection arm shaft (for registration plate) | ||||
| 07AA40163KC | Paper detect flag (L-SHAPED) - Mounts on right end of the paper detection arm shaft (for the paper tray) | ||||
| 07AA40171KC | Paper detection arm - For registration plate | ||||
| 07AA40183KC | Paper detection arm - For paper tray | ||||
| 07AA45567KC | Paper Charging Brush - Mounts on the Front of the Charge Transfer Assembly | ||||
| 07AA77260KC | 44 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis | ||||
| 07AA77271KC | 20 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis | ||||
| 07AA77280KC | 24 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis | ||||
| 07AA77290KC | 30 Tooth Gear - on Upper Right Side of Chassis | ||||
| 07AA77302KC | 52 Tooth Gear - Drives Cam/Gear Assembly on Both Side of Chassis (2 Used) | ||||
| 07AA77310KC | 24 Tooth Gear - on Upper Left Side Chassis - Attaches to Cam Clutch and Shaft Assembly | ||||
| 07AA77331KC | 25 Tooth Gear/Belt Pulley - on Lower Right Side of Printer | ||||
| 07AA77350KC | 18 Tooth Gear - Mounts on the Ends of the Lower Feed Roller and the Registrationon Feed Roller Shafts (on Lower Right Side of Printer) (2 Used) | ||||
| 07AA77360KC | 36 Tooth/24 Tooth Dual Gear - on Lower Right Side of Printer | ||||
| 07AA77611KC | Drive Belt - Drives Gears on Lower Right Side of Printer | ||||
| 07AA77620KC | Gear Drive Belt - Winds around Cluster of Gears and Pulleys Located on Upper Right Side of Chassis | ||||
| 07BA-1100KC | Cam Clutch and Shaft Assembly - Controls Developer Drive Motor - Clutch Located on Upper Right Side of Chassis Next to Solenoid (SL4) | ||||
| Part no longer supplied. | |||||
| 07BA-1660KC | Cam/Gear Assembly - on Upper Right Side of Chassis | ||||
| Part no longer supplied. | |||||
| 07BA-1670KC | Cam/Gear Assembly - on Upper Left Side of Chassis | ||||
| Part no longer supplied. | |||||
| 07BA-1701KC | Exit Roller (6 Used) - White Rollers Visible on Top Cover | ||||
| Part no longer supplied. | |||||
| 07BA-4062KC | Pickup rollers - Shaft with six `D` shaped rollers - Feeds paper from paper input tray | ||||
| 07BA-4072KC | Paper Feed Gear (a Spring Attaches to the Middle of the Gear) - on Lower Right Side of Printer | ||||
| Part no longer supplied. | |||||
| 07BA77320KC | 74 Tooth Gear/Belt Pulley - on Lower Right Side of Printer | ||||
| 07BA77850KC | 25 Tooth Gear - on Upper Right Side of Chassis | ||||
| 07BA77860KC | 36 Tooth Gear - on Upper Right Side of Chassis | ||||
| 07BA77990KC | 23 Teeth Gear - on Upper Right Side of Chassis | ||||
| 07BA78010KC | 19 Tooth Gear - on Upper Right Side of Chassis | ||||
| 33449-67904 | Maintenance kit (120V) - 100,000 page replacement parts (upper fan, fusing assembly, separation and fusing pads, upper feed roller and corona wire) | ||||
| 33449-67905 | New part for 33449-69008 | ||||
| 33449-69008 | Maintenance kit (220V) - 100,000 page replacement parts (Upper fan, fusing assembly, separation and fusing pads, feed roller, and corona wire) - Note: Feed roller in kit will NOT fit in the LaserJet IIID | ||||
| 33481-67908 | New part for 33481-69008 | ||||
| 33481-67912 | New part for 33481-69007 | ||||
| 33481-69008 | Maintenance Kit (220V) - Includes Fusing Assy, Separation Pad, Input Feed Roller, Transfer Roller, MP Pickup Roller, Internal Access Door Roller and Input Feed Roller Assembly | ||||
| 33491-67004 | Corrects Paper Crease Problem - in Job Offset Assy | ||||
| 392040140KC | 36 Tooth Gear (Paper Feed Gear Inserts into Center of This Gear) - on Lower Right Side of Printer | ||||
| 5062-4662 | Repair kit - For repairing broken paper cassette side support guides - Includes two bottom guides (for the paper cassette), left side support, and instructions | ||||
| 5182-2809 | Heating Element Assembly (For 220V to 240V Operation) - Bonds Toner to Paper by Heat - in Quantity Price Break Packaging (Contains 5 New Assemblies) - Sold in Europe ONLY | ||||
| 5182-2810 | Heating Element Assembly (For 220V to 240V Operation) - Bonds Toner to Paper by Heat - in Quantity Price Break Packaging (Contains 10 New Assemblies) - Sold in Europe ONLY | ||||
| C2001-67915 | New part for C2001-69013 | ||||
| C2001-69005 | Paper Pickup (Feeder) Assembly (Motor Driven) - Mounts in the Front Part of the Printer | ||||
| C2001-69013 | Maintenance kit (240V) - Includes multipurpose tray pickup roller, upper and lower cassette pickup rollers, separation pad, transfer roller, and fusing assembly (240V) | ||||
| C2009-69007 | Paper input unit - Complete paper feed | ||||
| Restored RG5-0025-220CN | |||||
| C2009-69008 | Job Offset Assy - Top Cover Paper Delivery Assembly | ||||
| C2037-67913 | New part for C2037-69011 | ||||
| C2037-69003 | Paper pickup (Feeder) assembly (Motor driven) | ||||
| Restored RG5-0877-000CN | |||||
| C2087A | Maintenance Kit - Replacement Parts after 200k Pages (240V) Includes, Transfer Roller and Clip, 6 Pickup Separation Rollers, Duplex Roller and (240V) Fusing Assembly | ||||
| C3120-60001 | Toner Collection Kit - Collects Excess Toner - Accessed by Lifting up Developer Access Door on Left Side of Printer | ||||
| C3124-60001 | Paper Pickup Assembly - Picks Up Paper from Upper and Lower Paper Trays - Includes Pickup, Feed and Separation Rollers | ||||
| C3124-60002 | Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it - Heavy media only | ||||
| C3166-69020 | Paper pickup assembly - Includes pickup, feed and separation rollers | ||||
| Restored RG5-1852-490CN | |||||
| C3916-69005 | Paper pickup (Feeder) assembly (Motor driven) | ||||
| Restored RG5-2195-000CN | |||||
| C3941-69003 | Laser/scanner assembly - Mounts on top of the internal main chassis | ||||
| C3965-67901 | Developer assembly - For developing black toner applied to the paper - (C3965A) | ||||
| C3966-67901 | Developer assembly - For developing the three colored toners applied to the paper - (C3966A) | ||||
| C3967-67901 | Photoconductive Drum Cartridge (C3967A) - All Four Colors are Applied Directly to Drum, Then Transferred to the Paper - Installs in Center of Printer (30,000 Pages Typical Life) | ||||
| C3968-67901 | Charge transfer assembly - Wide, burnt orange belt assembly located between the paper feed and fusing assemblies (60,000 pages typical life) - (C3968A and used as a replacement for C3110A) | ||||
| C4084-69003 | Fusing Assembly (240V,50Hz Operation) - Bonds Toner to Paper by Heat (C4198A) | ||||
| C4110-67910 | Transfer roller kit - Transfer roller with tools and repair instruction guide | ||||
| C4110-67911 | 500 sheet tray kit - Pickup roller and feed roller for 500 sheet input tray - Includes tools and instructions | ||||
| C4110-67912 | Pickup roller kit - Pickup roller with tools and repair instruction guide | ||||
| C4110-67913 | 250 sheet tray kit - Pickup roller and separation pad for 250 sheet input tray - Includes tools and instructions | ||||
| C4214-69017 | Paper pickup assembly - Includes pickup, feed and separation rollers | ||||
| C7058-69003 | Fusing roller assembly (For 220V to 240V operation) - Bonds toner to paper with heat | ||||
| C8049-67904 | Output Kicker - Left Side of Delivery Assembly | ||||
| C9148-69004 | ADF assembly - Does not include ADF input tray | ||||
| C9660-69004 | ETB kit - Electrostatic transfer belt assembly | ||||
| C9660-69009 | Fusing assembly - 110 volts | ||||
| C9724A | HP LaserJet 4600 Image Transfer - Electrostatic transfer belt assembly with cleaning cloth | ||||
| FA2-5600-000 | Leaf Spring - Retains Rear Door Roller (2 Used Per Roller) | ||||
| FA2-5606-000 | Clutch Drum - on End of Pickup Roller - in Cassette Pickup | ||||
| FA2-5607-000 | Clutch ring - Has nub to engage pickup roller solenoid | ||||
| FA2-5612-000 | Rear Door Roller - Held in Place with 2 Leaf Springs(3 Used) | ||||
| FA2-5613-000 | Leaf Spring - Retains Rear Door Roller (2 Used Per Roller) | ||||
| FG1-2354-000 | Manual Feed Assy - Gears and Drive Rollers Mounted on a Plate | ||||
| FH7-5033-020 | Feed solenoid (SL2) - For manual feed operation | ||||
| FH7-5034-000 | Cassette Solenoid - Engages Pickup Roller Clutch Ring | ||||
| FH7-7023-000 | Paper Exit Sensor (PS3) - in Front Center of Upper Main Body | ||||
| FH7-7024-000 | `Paper Out` Sensor (PS2) - in Cassette Pickup Area | ||||
| FH7-7027-000 | Paper Sensor (PS1) - in Registration Shutter Assembly | ||||
| FH7-7052-000 | Paper Sensor(PS2/4/5/6) - in Cassette Pickup and Delivery Assy | ||||
| FS1-0701-000 | Clutch Gear - on End of Pickup Roller - in Cassette Pickup | ||||
| FS1-2651-000 | Clutch Spring - on End of Pickup Roller - in Cassette Pickup | ||||
| Q1860-69004 | Laser/scanner assembly | ||||
| Q2425-69001 | Laser/scanner assembly | ||||
| Q2425-69010 | Fuser assembly for LaserJet 4200 series - 220 volt | ||||
| Q2431-69001 | Laser/scanner assembly | ||||
| Q2431-69009 | Fuser assembly for LaserJet 4300 series - 110 volt | ||||
| Q2431-69011 | Fuser assembly for LaserJet 4300 series - 110 volt | ||||
| Q2431-69012 | Fuser assembly for LaserJet 4300 series - 220 volt | ||||
| Q2439-67901 | New part for Q2439-69001 | ||||
| Q2439-69001 | Duplexer assembly for LaserJet 4200/4300 | ||||
| R75-0010-000 | Universal cassette tray - Adjusts for B5 to legal size paper | ||||
| R75-2010-000 | Universal Cassette Tray - Adjusts for Letter,Legal,Exec,A4 | ||||
| R75-4000-000 | Universal Cassette Tray `Tray 2` - Adjusts for Letter, Legal,Exec,A4 | ||||
| R98-1001-000 | Universal Cassette Tray `Tray 2` - Adjusts for Letter, Legal,Exec,A4 | ||||
| RA1-0666-000 | D-Shaped Pickup Roller - for Cassette Tray Feed (3 Used) | ||||
| RA1-0667-000 | Guide Plate - on Sides of Rear Door Rollers (2 Used/Roller) | ||||
| RA1-0977-000 | Cassette feed roller - Shaft with 3 small rollers on it | ||||
| RA1-1905-000 | Cassette feed roller - Shaft with 3 small rollers on it | ||||
| RA1-1964-000 | Delivery Roller - Mounted on Front Panel Door (4 Used) | ||||
| RA1-2621-000 | D-Shaped Pickup Roller - Cassette Feed (3 Used Per Shaft) | ||||
| RA1-2622-000 | D-Shaped Pickup Roller - Cassette Feed (1 Used Per Shaft) | ||||
| RA1-3828-000 | Paper sensing arm - For `paper out` and `manual feed` sensors | ||||
| RA1-3864-000 | Upper Transfer Guide (Silver Strip) - on Registration Assy | ||||
| RA1-3913-000 | Cassette Stop - Mounts on Right Side of Upper Pressure Assembly Shaft | ||||
| RA1-3917-000 | Cassette Stop - Mounts on Left Side of Upper Pressure Assembly Shaft | ||||
| RA1-4021-000 | Deflection Pawl Assy - Diverts Paper Output to Rear or Top | ||||
| RA1-4162-000 | `Tray Size` Sensing Lever - for Switch on DC Cntlr (3 Used) | ||||
| RA1-6143-000 | Deflector Pawl - Diverts paper output to rear or top | ||||
| RA1-7562-000 | Paper sensing lever - In right side of paper feed area | ||||
| RA1-7627 | Transfer charge roller (Black) - In paper path door assembly | ||||
| RA1-7627-000 | RA1-7627 | Transfer charge roller (Black) - In paper path door assembly | |||
| RA1-7627-000CN | RA1-7627 | Transfer charge roller (Black) - In paper path door assembly | |||
| RA1-7629-000 | Paper guide arm (Black) - Small curved side arms at MP input | ||||
| RA1-7708-040 | Delivery roller - Has four `Foam` rollers - For (Face down) top of printer paper output | ||||
| RA1-7717-000 | Paper sensor lever - On left side of paper feed area | ||||
| RA1-8244-000 | Paper deflector - Directs paper to top cover or face-up tray | ||||
| RB1-0221-000 | Upper paper transfer guide | ||||
| RB1-0260-000 | Arm - Holds Right Side of Transfer Roller - Mounted on Right Transfer Block | ||||
| RB1-0262-000 | Pivot - Small `rolling pin` shaped part that inserts into arm that holds right side of Transfer Roller | ||||
| RB1-0472-030 | Upper Delivery Guide - Curved Piece - on Bottom of Top Cover | ||||
| RB1-0818-030 | Retaining Clip (Blue) - Holds Transfer Roller in Place | ||||
| RB1-0870-000 | Envelope Feeder Clip - Increases Gap on Registration Assy | ||||
| RB1-1278-000 | Paper Sensing Lever - underneath Toner Cartridge Guide | ||||
| RB1-1344-000 | Bracket - For static eliminator behind separation pad | ||||
| RB1-1386 | Dual pickup roller - Two used on cassette pickup roller assembly | ||||
| RB1-1386-000 | RB1-1386 | Dual pickup roller - Two used on cassette pickup roller assembly | |||
| RB1-1386-000CN | RB1-1386 | Dual pickup roller - Two used on cassette pickup roller assembly | |||
| RB1-1411 | Pickup roller - For multipurpose input tray | ||||
| RB1-1411-000 | RB1-1411 | Pickup roller - For multipurpose input tray | |||
| RB1-1411-000CN | RB1-1411 | Pickup roller - For multipurpose input tray | |||
| RB1-2126-000 | Pickup roller (Quarter circle shaped) - For upper cassette | ||||
| RB1-2131-000 | Paper Guide - Guides Paper out of Tray 1 - Located to the Right Side of Pickup Roller | ||||
| RB1-2133-000 | `Paper Out` Sensor Arm - Part of Input Dual Sensor Assembly | ||||
| RB1-2155-000CN | Oblique roller - Right side of ETB - 2 used | ||||
| RB1-2181-000 | Guide Roller Holder (U-Shaped) - in Center of Paper Feed Asy | ||||
| RB1-2182-000 | Guide roller - In center of paper feed assembly | ||||
| RB1-2205 | Pickup roller (Oval shaped) - For multipurpose tray | ||||
| RB1-2205-000 | RB1-2205 | Pickup Roller - in Multipurpose Paper Tray Pickup Assembly | |||
| RB1-2205-000CN | RB1-2205 | Pickup roller (Oval shaped) - For multipurpose tray | |||
| RB1-2236-000 | Feeder guide - Ribbed (Gray) metal plate at top of printer | ||||
| RB1-2237-020 | Brush - Static Eliminating - Part of Transfer Guide Assy | ||||
| RB1-2253-000 | Guide Roller - Fits on Paper Guide/HV Contact Plate (6 Used) | ||||
| RB1-2259-040 | Rear Paper Holder - Attaches to Bottom of High Voltage Cover | ||||
| RB1-2299-030 | Delivery Roller - Double Roller in Paper Output Assy(4 Used) | ||||
| RB1-2302-000 | Delivery Roller Spring (U-Shaped) (4 Used) | ||||
| RB1-3029 | Pickup roller (D-shaped) - In pickup assembly | ||||
| RB1-3029-000 | RB1-3029 | Pickup roller (D-shaped) - In pickup assembly | |||
| RB1-3029-000CN | RB1-3029 | Pickup roller (D-shaped) - In pickup assembly | |||
| RB1-3097-000 | Paper exit (flag) lever - For the exit sensor - Mounts in the fusing assembly | ||||
| RB1-3097-000CN | Paper exit (flag) lever - For the exit sensor - Mounts in the fusing assembly | ||||
| RB1-3142-000 | Paper size guide/stop - For universal paper cassette tray | ||||
| RB1-3151-000 | Plastic side spring (clear) - Holds cassette tray in printer | ||||
| RB1-3339-000 | Paper Out Lever(Yellow) - Front Right Corner of Paper Tray | ||||
| RB1-3341-000 | Legal tray extension (Green) - Rear of paper tray | ||||
| RB1-3368-000 | Pickup roller (D-shaped) - In pickup assembly | ||||
| RB1-3477 | Pickup roller (Quarter circle shaped) - For upper cassette | ||||
| RB1-3477-000 | RB1-3477 | Pickup roller (Quarter circle shaped) - For upper cassette | |||
| RB1-3477-000CN | RB1-3477 | Pickup roller (Quarter circle shaped) - For upper cassette | |||
| RB1-3477-000DS | RB1-3477 | Pickup roller (Quarter circle shaped) - For upper cassette | |||
| RB1-3481-020 | Gear Cluster (Drive Train) Assembly - Attaches to Main Motor | ||||
| RB1-3481-020CN | Gear Cluster (Drive Train) Assembly - Attaches to Main Motor | ||||
| RB1-5467-000 | Static Dissipator - Mounts underneath Main Top Cover | ||||
| RB1-6006-000 | Paper Input Sensor Arm - on Front Left of Print Structure | ||||
| RB1-6134-000 | Tray 1 sensor arm | ||||
| RB1-6251-000 | Lower delivery roller - Pushes against the lower delivery roller shaft assembly | ||||
| RB1-6332 | Pickup Roller (D-Shaped) - in Universal Cassette Pickup Assy | ||||
| RB1-6332-000 | RB1-6332 | Pickup Roller (D-Shaped) - in Universal Cassette Pickup Assy | |||
| RB1-6332-000CN | RB1-6332 | Pickup Roller (D-Shaped) - in Universal Cassette Pickup Assy | |||
| RB1-6378-000 | Legal tray extension - Rear of universal cassette - Green paper stop inserts into this part | ||||
| RB1-6382-000 | Stop Plate(Green) - for Paper Length - in Universal Cassette | ||||
| RB1-6389-000 | Static Dissipator - Located Behind Separation Pad | ||||
| RB1-6441-000 | Transfer Guide Bushing - Mounted on Transfer Roller (2 Used) | ||||
| RB1-6461-000 | Damper holder - Front damper holder | ||||
| RB1-6462-000 | Damper holder - Rear damper holder | ||||
| RB1-6468-000 | Clutch cover - Paper feed clutch cover | ||||
| RB1-6557-000 | Paper input unit sensor arm - Senses when paper passes through paper input unit | ||||
| RB1-6558-020 | Sensor Arm Spring - Holds Tension on PIU Paper Sensor Arm | ||||
| RB1-6582-020 | Upper paper guide plate | ||||
| RB1-6622-050 | Fusing roller assembly with internal heating element - Upper roller in fuser assembly | ||||
| RB1-6623-030 | Lower roller in fusing assembly - Black pressure roller | ||||
| RB1-6708-000 | Retainer clip - Keeps multipurpose/tray 1 hinge in place - Black plastic clip for left side tray 1 hinge stop | ||||
| RB1-6709-000 | Retainer clip - Keeps multipurpose/tray1 hinge in place - Black plastic clip for right side tray 1 hinge | ||||
| RB1-6730 | Multipurpose paper input tray feed roller | ||||
| RB1-6730-000 | RB1-6730 | Multipurpose paper input tray feed roller | |||
| RB1-6730-000CN | RB1-6730 | Multipurpose paper input tray feed roller | |||
| RB1-6749-000 | Internal cover for Tray 1 pickup assembly | ||||
| RB1-6822-000 | Duplex roller - Roller in center of duplexer | ||||
| RB1-7129-000 | Case Grounding Strap | ||||
| RB1-7176-000 | Sheet guide - Mylar strip paper guide | ||||
| RB1-7177-000 | Paper Feed Frame - Main Frame that Parts such as Pickup Roller Assy and Separation Pad are Installed on | ||||
| RB1-7184-000 | Bushing - on Right End of Pickup Roller Assembly Shaft | ||||
| RB1-7185-000 | Left leg - Small leg on left side of paper kick plate | ||||
| RB1-7186-000 | Right leg - Small leg on right side of paper kick plate | ||||
| RB1-7197-000 | Clutch - on Left Side of Pickup Roller Assembly Shaft |
© 1997 - 2008 Jim Catanich - Dallas Internet Marketing Catanich Terms of Use Terms of Sale Privacy Statement Cookies About Contact Press Site Map |