Internet Marketing Dallas
Products » Printer Category » Other Internal Parts
Part Number |
Replacement |
Description |
|||
| 02686-69010 | Laser scanner unit - Does NOT include laser assembly | ||||
| 07AA32564KC | Upper Developer Pressure Spring (L-Shaped) - Attaches to Side of Internal Bracket (2 Used) | ||||
| 07AA32573KC | Lower Developer Pressure Spring (L-Shaped) - Attaches to Side of Internal Bracket (2 Used) | ||||
| 07AA32582KC | Center Developer Pressure Spring (L-Shaped) - Attaches to Side of Internal Bracket (2 Used) | ||||
| 07AA82532KC | Toner Hopper Lock Solenoid (SL6) - on Upper Left Side of Printer - Unlocks the Selected Toner Hopper | ||||
| 07AA88223KC | `Toner Out` Sensor(4 Used) - Mounts on Back of Toner Hoppers | ||||
| 07BA-1070KC | Interlock Switch Assy - Mounts to Upper Left Side Chassis Includes Three Switches That Detect Top Cover Open | ||||
| Part no longer supplied. | |||||
| 07BA-1340KC | Fuser Cooling Fan (FM9) - Center of Printer, under Top Cover | ||||
| Part no longer supplied. | |||||
| 07BA-1610KC | Developer Control Motor (M3) - on Upper Right Side of Chassis Located below Developer Drive Motor (M2) | ||||
| Part no longer supplied. | |||||
| 07BA-1640KC | Cam Solenoid (SL4) - on Upper Right Side Chassis - Engages Clutch That Causes Developer Drive Motor to Rotate | ||||
| Part no longer supplied. | |||||
| 07BA-3520KC | Toner Supply Solenoid Assembly (SL6) - Mounts on the Side of the Toner Hopper Assembly | ||||
| Part no longer supplied. | |||||
| 07BA-4180KC | Paper Feed Solenoid (SL1) - Lower Right Side of Printer Actuates Clutch to Allow Paper Pickup From Paper Tray | ||||
| Part no longer supplied. | |||||
| 07BA-4310KC | Registration Solenoid (SL2) - Lower Left Side of Printer Activation Causes Registration Plate to Drop | ||||
| 07BA80522KC | Tubeaxial Fan (FM8) - For the Power Supply Drawer Assembly (Mounts Behind the Lower Front Cover) | ||||
| 07BA80534KC | Formatter Board Cooling Fan (FM5) - Mounts on the Rear of Controller Board Case Assembly | ||||
| 07BA-9601KC | Paper size sensor - Detects size of paper tray being used | ||||
| Part no longer supplied. | |||||
| 07BM-1081KC | Main Body Fan (FM4) - Front Right Corner of Lower Chassis | ||||
| 07BM10971KC | Ozone Filter - Slides in Filter Holder in Front of the Main Body Fan (Behind the Control Panel Assembly) | ||||
| 07BM-1504KC | Main Motor (M1) Assembly - on Lower Right Side Chassis - Includes Gear Cluster on Attached Bracket | ||||
| Part no longer supplied. | |||||
| 07BM-1552KC | Developer Drive Assy (for 110V to 127V, 60Hz) - on Upper Right Side Chassis Includes Developer Drive Motor (M2), Developer Control Motor (M3), and Toner Supply Solenoid (SL3) | ||||
| 07BM-3911KC | Complete toner hopper assembly - Includes hoppers, augers, toner supply solenoid (SL6), and the 4 `Toner Out` sensors | ||||
| 07BP-1552KC | See Description Developer Drive Motor (M2) - in Upper Right Side of Chassis Above the Developer Control Motor (M3) - Motor NOT Sold Separately: Order the Developer Drive Assembly | ||||
| Part no longer supplied. | |||||
| 684285520KC | Paper Exit Photosensor (PS1) - Detects Media in Exit Assy | ||||
| C2001-69006 | Laser/scanner assembly | ||||
| C2009-69003 | Laser/scanner assembly | ||||
| C2037-69008 | Laser/scanner assembly | ||||
| C3137-00001 | Formatter PC board RFI shield - Mounts over the formatter board | ||||
| C3150-00005 | Shield - Attaches to Formatter (Main Logic) Board | ||||
| C3166-69006 | Laser/scanner assembly | ||||
| C3980-00007 | Formatter RFI Shield - Metal Cover Over the Formatter Board | ||||
| C4170-60101 | RFI Shield - Formatter Board RFI Shield | ||||
| C4214-69003 | Laser/scanner assembly | ||||
| C4781-60504 | Multi-Bin Mailbox Interface Cable - Short Cable from Printer to Multi-Bin Mailbox or Tray 4 and 5 - 45cm long C-link cable | ||||
| C4785-60530 | Multi-Bin Mailbox Interface Cable - Long Cable from Printer to Multi-Bin Mailbox - 178cm Long | ||||
| C8531-69009 | 2000-sheet feeder drive assembly | ||||
| FA2-5678-000 | Release hook - On left side - Latches upper body closed | ||||
| FA2-6026-000 | Latch - Mounts in power module - Engaged by release hook | ||||
| Q1334-00001 | RFI shield - Metal plate that covers the formatter PC board | ||||
| Q2676-00002 | RFI shield plate - Covers and protects the formatter PC board | ||||
| RA0-1006-000 | Tension spring - Provides tension for the floating gear holder (drive gear for the fusing assembly) - Mounts on the right side plate assembly | ||||
| RA0-1012-000 | Compression Spring - Grounds the pin in the toner cartridge drive gear - Mounts on the right side plate assembly | ||||
| RA0-1016-000 | 87 tooth / 23 tooth dual gear assembly - (Reduction gear) Drives the paper feed roller gear - Mounts on the right side plate assembly | ||||
| RA0-1026-000 | Torsion spring - Provides grounding connection to the toner cartridge (Photo sensitive drum) - Mounts on the inside of the right side plate assembly | ||||
| RA0-1035-000 | Torsion spring - Provides high voltage connection to the toner cartridge (developing cylinder) - Mounts on the left front side of the paper feed guide assembly | ||||
| RA0-1128-000 | Printed circuit board spacer - Mounts between the print engine control board and the metal support pan (six used) | ||||
| RA0-1161-000 | Front guide assembly - Ribbed plastic piece that runs the width of the printer - Mounts to the front of the left and right side plates | ||||
| RA0-1169-000 | Compression spring - Provides tension for the shutter lever - Mounts between the shutter lever and the laser/scanner assembly | ||||
| RA0-1172-000 | 17 tooth gear assembly - Includes the 17 tooth gear mounted on a black plastic bracket - Mounts to the right side plate assembly | ||||
| RA0-1173-000 | Mounting support - Metal piece that supports the paper pick-up solenoid (SL001) - Mounts on the right side plate | ||||
| RA0-1176-000 | 69 tooth gear - Large gear with ribs and six small holes - Mounts on on a rod in the upper rear corner of the right side plate | ||||
| RA0-1181-000 | Guide - For the shutter lever on the laser/scanner assembly - Mounts on the metal support bracket for the laser/scanner assembly | ||||
| RA0-1182-000 | Shutter lever - Spring loaded lever - Mounts to the top of the laser/scanner assembly | ||||
| RA0-1184-000 | Right side cover mounting support - Front Cover support - Mounts on the upper right corner of the right side plate | ||||
| RA0-1185-000 | Left side fuser bracket (`L` Shaped) - Provides mounting support for the fusing assembly - Mounts to the upper rear corner of the left side plate | ||||
| RA0-1186-000 | Right side fuser bracket (`L` Shaped) - Provides mounting support for the fusing assembly - Mounts to the upper rear corner of the right side plate | ||||
| RA0-1200-000 | Torsion spring - Provides high voltage connection to the toner cartridge (primary charging roller) - Mounts on the left rear side of the paper feed guide assembly | ||||
| RA0-1212-000 | Tension spring - Provides tension for the linkage which engages the toner cartridge drive gear - Mounts on the right side plate | ||||
| RA0-1524-000 | Mounting plate (stamped sheet-metal plate) - For the formatter PC board - Mounts on the left side plate assembly | ||||
| RA0-1528-000 | Small insulating sheet (clear plastic) - Protects the formatter board from shorting out - Mounts between the formatter PC board and the mounting plate | ||||
| RA1-3831-000 | Left release hook - Latches top cover closed | ||||
| RA1-3832-030 | Right release hook (with bracket) - Latches top cover closed | ||||
| RA1-3833-000 | Left hook guide - Supports hook shaft of left hook | ||||
| RA1-4038-000 | Fusing Assembly Cover (Slotted Black Plastic - Somewhat `S` Shaped) - Mounts on Underside of Top Cover (Covering the Delivery Roller) - Covers Fusing Assembly when Lid is Closed | ||||
| RA1-4046-000 | Top Cover Interlock Lever - Pushes Switch in DC Power Supply | ||||
| RA1-4132-000 | Front guide - For DRAM memory | ||||
| RA1-4133-000 | Rear Guide - for DRAM Memory | ||||
| RA1-6308-000 | Release lever - For toner cartridge | ||||
| RA1-7135-000 | Font guide - Inner metal structure for font cartridge slots | ||||
| RA1-7499-000 | Hinge pin (Clear plastic) - For the paper path door assembly | ||||
| RA1-7543-020 | Memory Board Guide - Supports Optional Memory Boards(4 Used) | ||||
| RA1-8276-000 | Upper Delivery Cover (V-Shaped Channel) - Mounts to the Bottom of the Top Cover (at the Rear Paper Output) | ||||
| RA1-8289-000 | Front memory board guide - Supports optional memory board | ||||
| RA1-8292-000 | Rear memory board guide - Supports optional memory board | ||||
| RA1-8299-000 | Memory Cover - Inner Metal Memory Board Access Cover | ||||
| RA1-8415-000 | Release lever - For toner cartridge | ||||
| RA1-8418-000 | Font guide - Inner metal structure for font cartridge slots | ||||
| RA2-0420-000 | Sensor Lever - Spring Attaches to it - Actuates Photosensor 402 Sensor Lever | ||||
| RA2-0831-000 | Fan bearing - For older (Japan servo) upper fan ONLY | ||||
| RA9-1127-000 | 20 Tooth Gear - Used on Diverter Drive Assembly | ||||
| RB1-1294-000 | Left slide arm - Supports front door when printer is opened | ||||
| RB1-1343-000 | Print density knob | ||||
| RB1-1385-000 | Right arm - Supports front door when printer is opened also actuates interlock switch on power supply | ||||
| RB1-1438-000 | Sensor Lever - for Photosensor 402 on Front Cover Connect Bd | ||||
| RB1-2080-000 | Laser Shutter - Attaches to Bottom of Laser/Scanner Assy | ||||
| RB1-2105-030 | Toner cartridge support - Black plastic bar that attaches above the toner cartridge | ||||
| RB1-2107-000 | Cassette Guide - Paper Cassette Support Guide - Left Side | ||||
| RB1-2138-000 | Top Cover Interlock Lever - Engages Switch on Paper Cntrl Bd | ||||
| RB1-2141-000 | Inner Cover Plate - Removed When Installing Envelope Feeder | ||||
| RB1-2226-000 | High voltage cover - Plastic `Pan` for high voltage board | ||||
| RB1-2343-000 | SIMM Access Cover Plate - Mounts on Formatter Shield Assy | ||||
| RB1-2974-000 | Grounding plate - for the gear train assembly | ||||
| RB1-2987-020 | High Voltage Shield - Mounted in Front of Printer - has Cutout for Modified Paper Sensor Arm | ||||
| RB1-3002-040 | Top Door Latch Bar (Spring Loaded) - Holds Top Door Closed | ||||
| RB1-3353-000 | Font door hinge bracket - In front left corner of printer | ||||
| RB1-5557-000 | Right slide rail - For main logic (Formatter) board | ||||
| RB1-5558-000 | Left slide rail - For main logic (Formatter) board | ||||
| RB1-5785-000 | Support Panel - Attaches to Main Logic (Formatter) Board | ||||
| RB1-5788-000 | Thumbscrew - Attaches panel to main logic (Formatter) board | ||||
| RB1-6414-000 | Shaft holding block - Front registration roller support | ||||
| RB1-6415-000 | Shaft holding block - Rear registration roller support | ||||
| RB1-6421-000 | Chassis Foot - right side - two used | ||||
| RB1-6427-000 | CG stopper - Toner cartridge guide stop - Holds toner cartridge in place | ||||
| RB1-6443-000 | Toner cartridge guide - Front guide - Plastic piece with slot to guide toner cartridge | ||||
| RB1-6444-000 | Release Arm - Front Toner Cartridge Release Arm - Left side of Toner Cartridge Guide Slot - Hook Shaped Cartridge Holder | ||||
| RB1-6446-000 | Release Arm - Toner Cartridge Release Arm - Right Side Toner Cartridge Guide Slot - Hook Shaped Cartridge Holder | ||||
| RB1-6464-000 | Upper Right Cover - Right Side - Above Drop Down Tray 1 | ||||
| RB1-6581-000 | Feed roller - Shaft with four rubber rollers - Under toner cartridge and green handle 3 | ||||
| RB1-6588-000 | Torque Limiter - Mounted Next to Separation Rollers (2 Used) | ||||
| RB1-6692-000 | Paper sensing lever - Senses paper in face down delivery assembly | ||||
| RB1-6693-020 | Paper height lever - Senses when face-down tray is full | ||||
| RB1-6771-000 | PCA guide - Formatter board support guides | ||||
| RB1-6775-000 | Slide guide - Guide for formatter PCA | ||||
| RB1-6776-000 | Tray Rail Guide - Spring Loaded Metal Guide That Right Side of Tray 2 and 3 Slide Into | ||||
| RB1-6777-000 | Tray Rail - Right Side Tray Rail - Channel That Attaches to Metal Frame for Tray 2 and 3 Support | ||||
| RB1-6778-000 | Rod - Tray connector rod for springs | ||||
| RB1-6783-000 | Tray stop - Right side tray stopper - Attached to right rear side of Tray 2 and 3 - Blue plastic piece | ||||
| RB1-7105-000 | Fuser Release Lever - Part of Fuser Release Assembly on Left Side of Printer | ||||
| RB1-7106-000 | Gear support plate - For gear kit #2 | ||||
| RB1-7107-000 | Gear holder - For gear kit #1 | ||||
| RB1-7109-000 | Guide - for Memory Expansion Cover (Door) - Attaches to Internal Main Chassis on Left Side | ||||
| RB1-7888-000 | Inner Cover Plate - Removed When Installing Envelope Feeder | ||||
| RB1-7888-000CN | Inner Cover Plate - Removed When Installing Envelope Feeder | ||||
| RB1-7913-000 | Cassette Guide - Paper Cassette Support Guide - Left Side | ||||
| RB1-7913-000CN | Cassette Guide - Paper Cassette Support Guide - Left Side | ||||
| RB2-1632-000 | Gear support plate - For gear kit #2 | ||||
| RB2-2812-000 | Grounding plate - Ground plate for fusing assembly RFI | ||||
| RB2-2817-000 | Dust Filter for Cooling Fan - | ||||
| RB2-2818-000 | Ribbon cable guide - Protects ribbon cable on right side | ||||
| RB2-2826-000 | Static dissipator - Discharges static electric charge as paper moves out of transfer charge roller | ||||
| RB2-2828-000 | Toner Cartridge Bias Connection - Rear Left Side | ||||
| RB2-2829-000 | Toner Cartridge Bias Connection - Forward Left Side | ||||
| RB2-2830-020 | Cartridge guide - Right side toner cartridge guide | ||||
| RB2-2831-020 | Cartridge guide - Left side toner cartridge guide | ||||
| RB2-2836-000 | Paper Sensor Lever - Mechanical Device That Engages Photo Sensor PS504 | ||||
| RB2-2837-000 | Torsion spring - Provides tension for paper sensor lever | ||||
| RB2-2838-000 | Separation pad holder for MP/tray 1 | ||||
| RB2-2842-000 | Paper Sensor Lever - Flag that mounts below registration assembly and passes through middle of metal plate - Activates PS502 the top of paper sensor | ||||
| RB2-2843-000 | Torsion spring - Provides a small amount of back pressure for the paper sensor flag | ||||
| RB2-2845-000 | Registration roller ground connection | ||||
| RB2-2847-000 | Leaf spring - Electrical ground connection | ||||
| RB2-2946-000 | FFC guide plate - Holds white flat cable in place | ||||
| RB2-3003-020 | Rear end plate of paper cassette | ||||
| RB2-3040-000 | Gear - 26 tooth - Tray 1 pick-up roller drive gear | ||||
| RB2-3041-000 | Tray hinge - For the left side of the multi-purpose front input tray (tray 1) | ||||
| RB2-3042-000 | Tray hinge - For the right side of the multi-purpose front input tray (tray 1) | ||||
| RB2-3045-000 | Chassis ground connection leaf spring | ||||
| RB2-3050-000 | Toner cartridge RFI ground connection | ||||
| RB2-3057-000 | Tension roller - Under middle paper transfer belt - Provides tension and guides bottom of middle belt | ||||
| RB2-3075-000 | Leaf spring - Chassis grounding spring | ||||
| RB2-3080-000 | Grounding plate - Electrical chassis ground connection | ||||
| RB2-3622-000 | Toner Cartridge Guide - Front Guide - Plastic Piece With Slot to Guide Toner Cartridge | ||||
| RB2-5515-000 | Front Fusing Rail - Front rail support for fusing assembly | ||||
| RB2-5516-000 | Rear Fusing Rail - Rear rail support for fusing assembly | ||||
| RB2-5517-000 | Front fusing mount - Front mount for fusing assembly | ||||
| RB2-5518-000 | Rear fusing mount - Rear mount for fusing assembly | ||||
| RB2-5523-000 | Fuser electrical contact leaf spring | ||||
| RB2-5529-000 | Chassis Foot - left side - two used | ||||
| RB2-5531-000 | Blanking cover - Behind cartridge release lever | ||||
| RB2-5547-000 | Left side alignment latch for front door | ||||
| RB2-5570-020 | Hinge mount damper - | ||||
| RB2-5607-000 | Fan cover - Metal cover for fan #5 - Cartridge fan cover | ||||
| RB2-5639-000 | Shutter arm - mecahnical link to laser shutter | ||||
| RB2-5640-000 | Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer | ||||
| RB2-5654-000 | Front cover hinge - hinge half that attaches to front of printer | ||||
| RB2-5661-000 | Switch rod - ON/OFF switch push rod | ||||
| RB2-5697-000 | Right front inside corner cover | ||||
| RB2-5759-000 | Torque Limiter - Limits Rotation of Feed Rollers | ||||
| RB2-5813-000 | Custom/standard media size selection switch | ||||
| RB2-5816-000 | Torsion spring - Provides tension for paper selector switch | ||||
| RB2-5845-000 | Jam removal knob - Green knurled knob used to clear paper jams from paper registration area | ||||
| RB2-6077-000 | Microswitch lever - Activates interlock switches from both the front and left doors | ||||
| RB2-6248-000CN | Damper assembly (gray plastic piece with small 13 tooth gear on it) - Helps to reduce clunking when the paper pick-up roller is engaged - engages the paper pick-up roller | ||||
| RB2-6249-000 | Feed Guide Hinge - | ||||
| RB2-6271-000 | Contact spring - High voltage contact for transfer roller | ||||
| RB2-9808-000CN | Bushing/shaft retainer assembly (Black plastic) - Holds the rotation drive shaft in the right side plate of the toner cartridge carousel (rotary) assembly | ||||
| RB2-9809-000CN | Bushing/shaft retainer assembly (White plastic) - Holds the rotation drive shaft in the left side plate of the toner cartridge carousel (rotary) assembly | ||||
| RB2-9903-000CN | Cable guide (Quartz Gray plastic) - Protects and supports the upper cable assembly - Mounts to the right rear on the laser/scanner support assembly | ||||
| RB2-9904-000CN | Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side - Directs air flow from the fan on the left side of the printer to the fusing assembly - Snap locks in center rear of printer | ||||
| RB2-9912-000CN | Top output bin guide - Small curvered ribbed black plastic piece - Snaps on the rear of the printer just below the upper top bin output roller (two used) | ||||
| RB2-9916-000CN | Mounting plate - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly | ||||
| RB2-9924-000CN | Sensor assembly mounting holder - For mounting the leading edge paper sensor for the fusing assembly (PS720) - Mounts to the underside of the middle frame assembly | ||||
| RB2-9925-000CN | Sensor arm and flag - Activates the photosensor (Does NOT include the roller) - For the Leading edge paper sensor for the fusing assembly (PS720) - Protrudes up through the feed plate on the middle frame assembly | ||||
| RB2-9932-000CN | RFI shield - Parallel wire form mounted over the fan - Mounts on the fan air duct assembly on the left side of the printer | ||||
| RB2-9954-000CN | Paper feed guide (black plastic) - Mounts to the left of the separation pad assembly on the lower front frame assembly | ||||
| RB2-9955-000CN | Paper feed guide (black plastic) - Mounts to the right of the separation pad assembly on the lower front frame | ||||
| RB3-0007-000CN | Insulating sheet (Transparent plastic) - Mounts between the bottom pan and the high and low voltage power supply boards | ||||
| RB3-0019-000CN | Toner catch tray (Curved black plastic piece) - Holds residual toner from photosensitive drum - Mounts just below the toner cartridge carousel on the bottom frame assembly | ||||
| RB3-0022-000CN | 22 tooth gear - Small black gear with diagonally cut teeth - Idler gear between the transfer roller assembly and the feed drive shaft - Mounts on the left side of the middle frame assembly | ||||
| RB3-0023-000CN | Interlock switch holder (Quartz Gray plastic) - Mounts to the laser/scanner support assembly - Towards the left rear of the printer | ||||
| RB3-0025-000CN | Airflow guide (duct) assembly and fan holder bracket (Quartz Gray plastic) - Mounts on the left metal side frame assembly | ||||
| RB3-0052-000CN | Gear Cover (Small black plastic cover) - Protects the idler gear for the transfer roller - Mounts toward the left side of the middle frame assembly | ||||
| RB3-0056-000CN | Insulating sheet (Transparent plastic) - Mounts to the underside of the middle frame assembly | ||||
| RB3-0060-000CN | Idler gear shaft (Short metal rod) - Shaft for the transfer and feed drive idler roller - Mounts on the left side of the middle frame assembly | ||||
| RB3-0062-000CN | PC board support (black plastic holder) - For mounting the small sub-high voltage board above the high voltage board | ||||
| RB3-0090-000CN | Rack slide - White plastic piece with gear teeth layed out in rack form on both sides - Part of the mechanism that disengages the imaging drum/transfer assembly cams | ||||
| when the top cover is opened - Mounts vertically on the metal right side frame | |||||
| RB3-0091-000CN | 16 tooth gear - Black plastic gear with large stop tooth and shaft lock tab - Used as part of the mechanism to disengage the drive cams for the imaging drum/transfer assembly - Mounts on the inside of the right side metal chassis assembly | ||||
| RB3-0092-000CN | 15 tooth gear with drive shaft (black plastic) - Used as part of the mechanism to disengage the drive cams for the imaging drum/transfer assembly - Mounts on the right side metal chassis frame | ||||
| RB3-0104-000CN | Roller cover - Covers the multi-purpose paper pick-up roller assembly - Mounts in the lower portion of the front frame assembly | ||||
| RB3-0121-000CN | Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer - Mounts on the upper right side of the front frame assembly |
|
|
|
|
© 1997 - 2010 Catanich Internet Marketing - All rights reserved Catanich Terms of Use Terms of Sale Privacy Cookies About Contact Press Site Map |