Internet Marketing Dallas
Products » Printer Category » Electronics - Power Cords
Part Number |
Replacement |
Description |
|||
| 8120-6800 | Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V in Israel) | ||||
| 8120-6809 | Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia) | ||||
| 8120-6811 | Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V in Europe, Saudi Arabia, South Africa, India, and Korea) | ||||
| 8120-6812 | Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA, Canada, Mexico, Philippines, and Taiwan) | ||||
| 8120-6813 | Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V in South Africa, Saudi Arabia, and India) | ||||
| 8120-6814 | Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V in Denmark) | ||||
| 8120-6815 | Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V in Switzerland) | ||||
| 8120-6869 | Power cord (Flint Gray) - 2.3m (7.5ft) long, 3-wire - Has straight (F) receptacle (For 220V in Argentina) | ||||
| 8120-8382 | Power cord (Flint Gray) - 18 AWG, 1.8m (6.0ft) long - Has straight (F) receptacle (For 120V in the USA and Canada) | ||||
| 8120-8707 | Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V in China) | ||||
| 8120-8871 | Power cord (Black) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V in Thailand, Cambodia, Vietnam, and the Philippines) | ||||
| 8121-0516 | Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 220V in Europe) | ||||
| 8121-0517 | Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong, Singapore, and Malaysia) | ||||
| 8121-0518 | Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 220V in Denmark) | ||||
| 8121-0519 | Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 220V in Switzerland) | ||||
| 8121-0520 | Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 240V in India) | ||||
| 8121-0524 | Power cord (Flint Gray) - 18 AWG, 1.9m (6.25ft) long - Has straight (F) receptacle (For 240V in Australia) | ||||
| 8121-0780 | Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 240V in India) | ||||
| C6502A | HP IEEE 1284 parallel printer port module - | ||||
| C9145-67901 | New part for C9145-69001 | ||||
| C9145-69001 | Formatter board assembly - Includes the formatter board and all the metal cage covers - Mounts towards the rear on the metal right frame assembly | ||||
| C9705-69003 | DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly) | ||||
| C9706-60104 | Flat flexible cable - Connects between the DC controller board and the formatter board | ||||
| J6039-69031 | JetDirect 200m print server/Internet c | ||||
| J6057-61001 | New part for J6057-69001 | ||||
| J6057-69001 | JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has one RJ-45 connector - (Part of J6057A) | ||||
| Q1342-60001 | New part for Q1342-69001 | ||||
| Q1342-69001 | Cable pod assembly - Includes USB cable with attached pod assembly - Connects the LaserJet to the Computer | ||||
| Q1890-60001 | Formatter PC board assembly - Mounts to the left side frame assembly | ||||
| Q2455-60001 | Formatter PC board assembly - Mounts to the left side frame assembly | ||||
| Q2678-67901 | Formatter PC board - Includes connectors for the USB and parallel ports - Mounts on the left side plate | ||||
| RB2-9942-000CN | Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boards - Mounts on the top left of the front frame assembly | ||||
| RB3-0016-000CN | Electrical contact spring - Spring steel wire with compression springs formed on both ends - One end provides upward pressure on the right bushing for the transfer roller - Connects to high voltage board | ||||
| RB3-0042-000CN | Electrical contact spring - Mounts on the middle frame assembly behind the transfer roller - Of the four similar springs, this one is next to the one on the far left - Connects to high voltage board | ||||
| RB3-0043-000CN | Electrical contact spring - Mounts on the middle frame assembly behind the transfer roller - Of the four similar springs, this one is on the far right - Connects to high voltage board | ||||
| RB3-0044-000CN | Electrical contact spring - (Front) Provides high voltage to the toner cartridge via a cable assembly and connection through the carousel plate assembly - Connects to the high voltage board | ||||
| RB3-0045-000CN | Electrical contact spring - (Rear) Provides high voltage to the toner cartridge via a cable assembly and connection through the carousel plate assembly - Connects to the high voltage board | ||||
| RB3-0046-000CN | Electrical contact spring - Mounts on the middle frame assembly behind the transfer roller - Of the four similar springs, this one is just to the left of the one on the far right - Connects to high voltage board | ||||
| RB3-0047-000CN | Electrical contact spring - Mounts on the underside of the middle frame assembly - Connects to high voltage board | ||||
| RB3-0048-000CN | Electrical contact spring - Mounts on the middle frame assembly behind the transfer roller - Of the four similar springs, this one is on the far left - Connects to the high voltage board | ||||
| RB3-0057-000CN | Transfer slide plate - Small `U` shaped metal insert plates - Mount in the bushing wells for the transfer roller on the middle frame assembly (2 Used) | ||||
| RB3-0065-000CN | Ground plate (Copper clad metal spring) - Mounts on the left side of the middle frame below the entrance guide assembly | ||||
| RB3-0119-000CN | Grounding plate - Grounds the paper pick-up solenoid cover to the right side metal chassis | ||||
| RB3-0120-000CN | Solenoid cover (Steel) - Cover for the multi-purpose tray pickup roller solenoid (SL92) | ||||
| RB3-0179-000CN | Left side lock release lever - Part of locking system used to secure the fusing assembly in the printer | ||||
| RB3-0286-000CN | Contact plate - Runs between the shaft on the registration roller and the metal entrance guide assembly | ||||
| RF5-4010-000CN | Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assembly | ||||
| RG0-1030-000 | Fan and airflow guide assembly - Mounts to the upper front on the right side plate | ||||
| RG0-1090-000 | Connector PC board assembly - Has connector for the cable pod assembly - Mounts on the left side plate of the printer | ||||
| RG0-1093-000 | Engine control PC board - Main logic and power supply board for the printer - Mounts in the bottom of the printer (For 110V to 127V operation) | ||||
| RG0-1094-000 | Engine control PC board - Main logic and power supply board for the printer - Mounts in the bottom of the printer (For 220V to 240V operation) | ||||
| RG0-1097-000 | 4-wire cable assembly - Connects between the laser/scanner assembly and the formatter PC board | ||||
| RG0-1166-020 | Engine control PC board - Control and power supply board for the printer (For 220V to 240V operation) - Mounts in the bottom of the printer | ||||
| RG5-6880-000CN | Laser/scanner assembly - Mounts in the center of the scanner support assembly | ||||
| RG5-6911-000CN | Drive assembly - Includes the mounting brackets, two drive motors, solenoid, and the two drive gears - Rotates the toner cartridge carousel (DCM703) and provides drive for toner operation (PM705) | ||||
| RG5-6942-000CN | Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame | ||||
| RG5-6956-000CN | E-label reader PC board ONLY - Mounts in the E-label reader assembly | ||||
| RG5-6957-000CN | E-label reader - Connects cartridge nonvoliatile memory to the DC controller board - One for the imaging drum/tranfer assembly, the other for toner cartridges - | ||||
| One mounts to the the front frame assembly, the other to the toner cartrige carousel assembly | |||||
| RG5-6958-000CN | Rotary motor assembly - (DCM703) Rotates the four color toner cartridges in the carousel to position one of them for printing | ||||
| RG5-6959-060CN | New part for C9705-69003 | ||||
| RG5-6960-000CN | High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer - Mounts in the bottom pan (Towards the front of the printer) | ||||
| RG5-6964-000CN | Carousel position and toner level photoelectric sensor PC board - `L` Shaped PC board with the two sensors - (PS51) Mounts on the left plate in the toner cartridge carousel | ||||
| RG5-6965-000CN | Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly - Mounts on the right side wall of the front frame assembly | ||||
| RG5-6966-000CN | Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch - (PS71 and SW71) Mounts in the upper left corner of the front frame assembly | ||||
| RG5-6967-000CN | Registration sensor PC Board - Small board with flag activated photosensor - (PS711) Mounts in the registration assembly on the underside of the middle frame | ||||
| RG5-6971-000CN | Cable assembly (3 pin) - Power cable for the fusing assembly - Connects from the fusing assembly connector to the chassis ground and the low voltage power supply board | ||||
| RG5-6974-000CN | Cable assembly - Connects the toner cartridge E-label reader assembly on the carousel to the DC controller board | ||||
| RG5-7106-000CN | Cable assembly (2 pin) - Connects from the low voltage power supply board to the formatter board | ||||
| RG5-7107-000CN | Cable assembly (8 pin, red wire) - (J402 to J134) Connects the low voltage power supply board to the DC controller board | ||||
| RG5-7108-000CN | Cable assembly (8 pin, purple wire) - (J403 to J133) Connects the low voltage power supply board to the DC controller board | ||||
| RG5-7109-000CN | Cable assembly (7 pin) - Connects the DC controller board to the fusing assembly connector | ||||
| RG5-7114-000CN | Cable assembly - Short cable with two connectors and shield - Connects between the toner cartridge drive motor and the DC controller board | ||||
| RG5-7115-000CN | Cable assembly - Connects between the roller engaging sensor (PS714) and the DC controller board | ||||
| RG5-7117-000CN | Cable assembly - Connects the engaging sensor (PS 712) on the toner cartridge carousel to the DC controller board | ||||
| RG5-7122-000CN | Cable assembly - `Y` type cable 14 pin connector goes to 8 pin and 6 pin connectors - Connects between the DC controller board and the optional paper tray connector | ||||
| RG5-7123-000CN | Grounding cable assembly - Connects between the optional tray connector housing and the metal right side frame assembly | ||||
| RG5-7124-000CN | Sub-high voltage board - Small auxillary PC board - Mounts in a holder just above the high voltage board | ||||
| RG5-7126-000CN | Cable assembly - Connects the Sub-high voltage board to the high voltage board | ||||
| RG5-7128-000CN | Cable assembly - Connects between the DC controller board and the leading edge paper sensor for the fusing assembly (PS720) and the waste toner sensor board | ||||
| RG5-7129-000CN | Cable assembly - Connects the toner cartridge contacts on the left carousel side plate to the high voltage power supply | ||||
| RG5-7130-000CN | High voltage cable assembly - Connects between the high voltage board spring contacts and the cables to the toner cartridge carousel left plate assembly | ||||
| RG5-7144-000CN | Upper cable assembly (with seven connectors) - Interconnects various upper level components to the DC controller board | ||||
| RG5-7145-000CN | Front cable assembly (with six connectors) - Interconnects various components on the front frame assembly and right side to the DC controller board | ||||
| RG5-7146-000CN | High voltage cable assembly (Four connector) - Connects between the high voltage power supply board and the DC controller board | ||||
| RH2-5519-000CN | Connector assembly - For optional paper tray - Mounts to the bottom right side of the middle frame assembly | ||||
| RH2-5520-000CN | Connector for the fusing assembly (F) - 7 small contol pins plus 3 separated high current pins - Mounts in the connector housing mounted on the bottom pan of the printer | ||||
| RH2-5524-000CN | Flat flexible cable - Connects between the laser/scanner assembly and the DC controller board | ||||
| RH2-5594-000 | Flex ribbon cable assembly - Has two 10 pin (M) edge connectors - Connects between the laser/scanner assembly and the formatter PC board | ||||
| RH3-2243-000CN | Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch - Mounts in the bottom pan towards the rear of the printer | ||||
| RH3-2252-000CN | Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch - Mounts in the bottom pan towards the rear of the printer | ||||
| RH7-1533-000CN | Stepping motor - 24V DC - (PM704) Swings (or engages) the toner cartridge carousel in place to transfer toner -Mounts on the left side of the rear frame assembly | ||||
| RH7-1535-000CN | Stepping motor (24V) - (PM705) Used to drive the internal rollers and mechanisms in the toner cartridge when it has been rotated in the printing position on the carousel | ||||
| RH7-1537-000CN | Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA) - (FM712) Mounts in the airflow guide/fan bracket assembly on the left side of the printer | ||||
| RH7-5315-000 | 24V DC Solenoid - Engages the pick-up roller gear/clutch assembly - Mounts on the right side plate assembly | ||||
| RH7-5337-000CN | Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pick-up roller for the multi-purpose input tray (tray 1) | ||||
| RH7-5340-000CN | Solenoid assembly - (SL93) Engages to stop rotation when the proper toner cartridge on the carousel is in place for printing | ||||
| RH7-5366-000CN | Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft - (CL2) Engages the roller within the imaging drum/transfer assembly from the main gear train | ||||
| RH7-6051-000CN | Microswitch with lever activator - (SW2) Senses when the top cover is open - Mounts in a holder on the scanner support assembly | ||||
| RH7-7146-000CN | Density photoelectric sensor PC board - (PS81) Mounts under the light blocking pad on the top of the front frame assembly | ||||
| RH7-7149-000CN | Thermistor - (TH3) For detecting internal temperature - Mounts to the metal right side frame assembly just above the DC controller board | ||||
| RK2-0029-000 | Flex cable - Has two 14 pin (M) edge connectors - Connects between the laser/scanner assembly and the formatter PC board | ||||
| RM1-0171-000 | Laser/scanner assembly with flat flexible cable (FFC) - Does NOT include the laser shutter arm - Mounts on top of the print structure frame | ||||
| RM1-0524-000 | Laser/scanner assembly - Mounts on top of the print structure frame | ||||
| RM1-0529-000 | Connector and holder assembly - To interconnect the optional lower paper tray to the printer - Mounts on the left side frame assembly | ||||
| RM1-0542-000 | E-label contact and holder assembly - Contacts the non-volatile memory in the toner cartridge - Mounts on the bottom of the laser/scanner support shelf | ||||
| RM1-0549-000 | Control panel assembly - Includes the `Go` button and LED, `Ready` LED, and `Attention` LED mounted on the left front cover support - Mounts on the upper left corner of the left side plate | ||||
| RM1-0563-000 | Scanner motor cable assembly - 4 pin (F) connector to 4-pin (F) connector - Connects between the laser/scanner assembly and the formatter board | ||||
| RM1-0564-000 | Engine control PC board - Control and power supply board for the printer (For 110V to 127V operation) - Includes the power cord connector and power switch - Mounts in the bottom of the printer | ||||
| RM1-0565-000 | Engine control PC board - Control and power supply board for the printer (For 220V to 240V operation) - Includes the power cord connector and power switch - Mounts in the bottom of the printer | ||||
| RM1-0566-000 | Engine control PC board - Control and power supply board for the printer (For 110V to 127V operation) - Includes the power cord connector and power switch - Mounts in the bottom of the printer | ||||
| RM1-0567-000 | Engine control PC board - Control and power supply board for the printer (For 220V to 240V operation) - Includes the power cord connector and power switch - Mounts in the bottom of the printer | ||||
| RM1-0649-000 | Fusing assembly - Bonds toner to paper with heat - For 110V to 127VAC (+/- 10%) operation - Mounts in the upper rear of the printer - Mounts in the upper rear of the printer | ||||
| RM1-0655-000 | Fusing assembly - Bonds toner to paper with heat - For 220V to 240VAC (+/- 10%) operation - Mounts in the upper rear of the printer | ||||
| RM1-0806-000 | Print engine control board - Provides timing and control of the printer motors and functions - Mounts on the print structure frame above the laser/scanner assembly | ||||
| RM1-0807-000 | Power supply board assembly - Includes the input power cord connector and power swith - For 110V to 127VAC (+/- 10%) operation - Mounts on the left side of the print structure frame | ||||
| RM1-0808-000 | Power supply board assembly - Includes the input power cord connector and power swith - For 220V to 240VAC (+/- 10%) operation - Mounts on the left side of the print structure frame | ||||
| WG8-5382-000CN | Photosensor (Flag activated) - (PS718) Paper sensor for the multi-purpose tray - Mounts in the lower right of the front frame assembly and (PS720) Front of page | ||||
| sensor for the fusing assembly - Mounts on the underside of the middle frame assembly (2 used) |
© 1997 - 2010 Catanich Internet Marketing - All rights reserved Catanich Terms of Use Terms of Sale Privacy Statement Cookies About Contact Press Site Map |