| 07AA40163KC |
Paper detect flag (L-SHAPED) - Mounts on right end of the paper detection arm shaft (for the paper tray) |
| 07AA40171KC |
Paper detection arm - For registration plate |
| 07AA40183KC |
Paper detection arm - For paper tray |
| 07AA45567KC |
Paper Charging Brush - Mounts on the Front of the Charge Transfer Assembly |
| 07AA77260KC |
44 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis |
| 07AA77271KC |
20 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis |
| 07AA77280KC |
24 Tooth Gear/Belt Pulley - on Upper Right Side of Chassis |
| 07AA77290KC |
30 Tooth Gear - on Upper Right Side of Chassis |
| 07AA77302KC |
52 Tooth Gear - Drives Cam/Gear Assembly on Both Side of Chassis (2 Used) |
| 07AA77310KC |
24 Tooth Gear - on Upper Left Side Chassis - Attaches to Cam Clutch and Shaft Assembly |
| 07AA77331KC |
25 Tooth Gear/Belt Pulley - on Lower Right Side of Printer |
| 07AA77350KC |
18 Tooth Gear - Mounts on the Ends of the Lower Feed Roller and the Registrationon Feed Roller Shafts (on Lower Right Side of Printer) (2 Used) |
| 07AA77360KC |
36 Tooth/24 Tooth Dual Gear - on Lower Right Side of Printer |
| 07AA77611KC |
Drive Belt - Drives Gears on Lower Right Side of Printer |
| 07AA77620KC |
Gear Drive Belt - Winds around Cluster of Gears and Pulleys Located on Upper Right Side of Chassis |
| 07AA82532KC |
Toner Hopper Lock Solenoid (SL6) - on Upper Left Side of Printer - Unlocks the Selected Toner Hopper |
| 07AA88223KC |
`Toner Out` Sensor(4 Used) - Mounts on Back of Toner Hoppers |
| 07BA-1070KC |
Interlock Switch Assy - Mounts to Upper Left Side Chassis Includes Three Switches That Detect Top Cover Open |
| 07BA-1100KC |
Cam Clutch and Shaft Assembly - Controls Developer Drive Motor - Clutch Located on Upper Right Side of Chassis Next to Solenoid (SL4) |
| 07BA-1130KC |
Lower front cover - Includes power button and font access door |
| 07BA-1150KC |
Right side cover - Includes SIMM slot access door |
| 07BA-1162KC |
Toner Hopper Cover - Top/Rear of Printer - Includes Toner Hopper Access Door |
| 07BA12135KC |
Release Button - for the Top Cover Assembly |
| 07BA12414KC |
Rear Feed Unit Support Bracket (Large) - on Lower Rear Cover |
| 07BA12441KC |
Rear Feed Unit Support Bracket (Small) - on Lower Rear Cover |
| 07BA12582KC |
Flip-Up Paper Stop - on Top Cover - for Paper Output |
| 07BA-1340KC |
Fuser Cooling Fan (FM9) - Center of Printer, under Top Cover |
| 07BA-1370KC |
Left Side Cover - below Flip-up Developer Access Door |
| 07BA-1430KC |
Font cartridge access door - Right side of lower front cover |
| 07BA-1441KC |
Top Cover - Includes Paper Stop, Hinge Assembly and Cover Release Button with Spring - Order Nameplate Separately |
| 07BA-1450KC |
SIMM slot access door - Attaches to right side cover |
| 07BA-1610KC |
Developer Control Motor (M3) - on Upper Right Side of Chassis Located below Developer Drive Motor (M2) |
| 07BA-1640KC |
Cam Solenoid (SL4) - on Upper Right Side Chassis - Engages Clutch That Causes Developer Drive Motor to Rotate |
| 07BA-1660KC |
Cam/Gear Assembly - on Upper Right Side of Chassis |
| 07BA-1670KC |
Cam/Gear Assembly - on Upper Left Side of Chassis |
| 07BA-1701KC |
Exit Roller (6 Used) - White Rollers Visible on Top Cover |
| 07BA-3160KC |
Developer Access Door - Flip-up Cover on Left Side |
| 07BA-3520KC |
Toner Supply Solenoid Assembly (SL6) - Mounts on the Side of the Toner Hopper Assembly |
| 07BA-4062KC |
Pickup rollers - Shaft with six `D` shaped rollers - Feeds paper from paper input tray |
| 07BA-4072KC |
Paper Feed Gear (a Spring Attaches to the Middle of the Gear) - on Lower Right Side of Printer |
| 07BA-4121KC |
Lower rear cover (serial number of printer is on this cover) - Includes double roller assembly in center of cover |
| 07BA-4180KC |
Paper Feed Solenoid (SL1) - Lower Right Side of Printer Actuates Clutch to Allow Paper Pickup From Paper Tray |
| 07BA-4310KC |
Registration Solenoid (SL2) - Lower Left Side of Printer Activation Causes Registration Plate to Drop |
| 07BA-5005KC |
Complete paper exit assembly - Includes gears, belt, rollers, sensor etc. - ONLY part separately available is photosensor (PS1) |
| 07BA-6503KC |
Laser/Scanner Assembly - Located Under Top Cover of Printer |
| 07BA-70031KC |
Control panel cover - For display area |
| 07BA-7010KC |
Control panel cover (L-shaped) - Shows button functions (English) |
| 07BA-7323KC |
Developer High Voltage Supply - Located on Upper Right Side |
| 07BA77320KC |
74 Tooth Gear/Belt Pulley - on Lower Right Side of Printer |
| 07BA77850KC |
25 Tooth Gear - on Upper Right Side of Chassis |
|
Internet Marketing Dallas